Propshaft for MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO II (CE9A) 261 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Propshaft for your MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO II (CE9A) 4G63 Turbo 192 kW from 01.1994
High quality car parts for your MITSUBISHI at low prices
Article No.: 0 242 245 552
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: MO-511
More
- Filter type: Spin-on Filter
- Height [mm]: 87
- Thread Size: M20 P1.5
- Diameter [mm]: 71
- Condition: new
Read the product details
Article No.: 7O0012P
More
- Filter type: Spin-on Filter
- Height [mm]: 92
- Thread Size: M 20 X 1.5
- Inner Diameter 2 [mm]: 54
- Bypass Valve Opening Pressure [bar]: 1
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 66
- Outer Diameter 2 [mm]: 62
- Condition: new
Read the product details
Article No.: SKWIB-0940117
More
- Fitting Position: Front, Driver side
- Length [mm]: 500
- Styling: without spoiler
- Quantity: 1
- Wiper blade type: Flat wiper blade, Beam
- Number of adapters: 3
- Type: multiconnection
- Condition: new
Read the product details
Article No.: PUR-PO8014
More
- Filter type: Spin-on Filter
- Height [mm]: 85
- Thread Size: M 20x1,5
- Inner Diameter 2 [mm]: 63, 55
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 69,5
- Valve type: Pressure Limiting Valve
- Outer Diameter 2 [mm]: 63
- Condition: new
Read the product details
Article No.: 4263
More
- Spanner Size: 21
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,30
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,76
- Connector type: SAE
- Weight [kg]: 0,07
- Resistor [kOhm]: 8
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: new
Read the product details
Article No.: 0 242 240 592
More
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 0 451 103 316
More
- Filter type: Spin-on Filter
- Height [mm]: 72
- Thread Size: M 20 x 1,5
- Bypass Valve Opening Pressure [bar]: 1
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 82
- Quantity: 1
- Gasket outside diameter [mm]: 66
- Gasket inside diameter [mm]: 57
- Condition: new
Read the product details
Article No.: COF100129S
More
- Filter type: Spin-on Filter
- Height [mm]: 66
- Thread Size: M20x1.5
- Inner Diameter [mm]: 62
- Diameter [mm]: 68
- Diameter 1 [mm]: 69
- Version: w/ Anti-Drain valve, with By-Pass valve
- Packing Type: Box
- Packaging length [cm]: 7
- Packaging width [cm]: 7
- Packaging height [cm]: 7
- Condition: new
Read the product details
- Drive Shaft Coupler MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO II (CE9A) 261 hp
- Propeller Shaft Bearing MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO II (CE9A) 261 hp
- Differential Parts MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO II (CE9A) 261 hp
- Transfer Case Parts MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO II (CE9A) 261 hp
