Blower control unit for MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.8 GTi (CB5A) 136 HP
change
Select your vehicle
High quality car parts for your MITSUBISHI at low prices
Article No.: 10599
More
- Filter type: Spin-on Filter
- Diameter [mm]: 80
- Length [mm]: 76
- Internal Thread [mm]: M20 x 1,5
- Fitted Diameter [mm]: 64
- for OE number: 2630035505
- Technical Information Number: By-pass
- Condition: new
Read the product details
Article No.: 6465
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Product line: V-Line
- TecDoc Engine Number: 4G93 (DOHC 16V)
- Condition: new
Read the product details
Article No.: GCF860032
More
- Construction Year from: 05/1992
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,7
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: F113501
More
- Filter type: Spin-on Filter
- Height [mm]: 87
- Thread Size: M20x1,5
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 69
- for OE number: 1109AE
- Condition: new
Read the product details
Article No.: F101401
More
- Filter type: Spin-on Filter
- Height [mm]: 85
- Thread Size: M20x1,5
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 69
- for OE number: 1109-AE
- Condition: new
Read the product details
Article No.: 686S0317
More
- Construction Year from: 05/1992
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,7
- Connector type: SAE/M4
- Quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 686S0003P
More
- Construction Year from: 05/1992
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Number of pins: 1
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: new
Read the product details
Article No.: 39-1000
More
- Fitting Position: Front
- Length [mm]: 500, 450
- Wiper blade type: Bracket wiper blade without spoiler
- Quantity Unit: Kit
- Condition: new
Read the product details
Article No.: 686S0009
More
- Construction Year from: 05/1992
- Required quantity: 4
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 61556
More
- Filter type: Spin-on Filter
- Height [mm]: 92
- Thread Size: M 20 X 1.5
- Inner Diameter 2 [mm]: 54
- Bypass Valve Opening Pressure [bar]: 1
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 66
- Outer Diameter 2 [mm]: 62
- Condition: new
Read the product details
- Headlights MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.8 GTi (CB5A) 136 hp
- Turn Signal Light MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.8 GTi (CB5A) 136 hp
- Tail Lights MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.8 GTi (CB5A) 136 hp
- Sensors and Switches MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.8 GTi (CB5A) 136 hp
- Fog Lights MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.8 GTi (CB5A) 136 hp
