00#
88-3325
MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8GTi 16V (C69A) 140 hp 1992 Blower control unit

Idle air control valve for Mitsubishi Lancer 4 1.8 GTi 16V (C69A) 140 HP

change

Here you can find 20 quality car parts, such as Idle air control valve for your MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 GTi 16V (C69A) 4G93 (DOHC 16V) 103 kW from 06.1992
Filter
Blower control unit for Lancer IV Hatchback (C6_A, C7_A)

High quality car parts for your MITSUBISHI at low prices

ASHIKA SA-X50C Idle speed control valve Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1992
ASHIKA SA-X50C Wiper blade Front, Driver side, 500mm
Article No.: SA-X50C
More
  • Fitting Position: Front, Driver side
  • Length [mm]: 500
  • Condition:  new
£ 6,16
incl. 20% VAT, delivery costs
In stock
- +
CHAMPION OE039/T10 Idle control valve, air supply Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1993
CHAMPION Powersport OE039/T10 Spark plug M4/SAE, Nickel GE, 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
Article No.: OE039/T10
More
  • Spanner Size: 16 mm
  • Thread Length [mm]: 19
  • Spark Position [mm]: 3
  • Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
  • Thread Size: M14x1.25
  • Product line: Powersport
  • Connector type: M4/SAE
  • Required quantity: 4
  • Packing Type: Box
  • Quality/ Grade: Nickel GE
  • Technical Information Number: RC9YC4
  • Tightening torque from [Nm]: 25
  • Tightening torque to [Nm]: 30
  • Packaging length [cm]: 8,85
  • Packaging width [cm]: 2,6
  • Packaging height [cm]: 2,35
  • Resistor from [kOhm]: 3
  • Resistor to [kOhm]: 9
  • Projection [mm]: 1,5
  • Condition:  new
£ 3,77
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
RIDEX 686S0009 Idle air control valve Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1992
RIDEX 686S0009 Spark plug
Article No.: 686S0009
More
    • Engine Code: 4G93 Kat.
    • Required quantity: 4
  • Spanner Size: 16 mm
  • External Thread [mm]: 14
  • Thread Length [mm]: 19
  • Spark Position [mm]: 3
  • Thread Pitch [mm]: 1,25
  • Electrode Gap [mm]: 1,1
  • Tightening Torque [Nm]: 28
  • Number of pins: 1
  • Tightening angle [degrees]: 90
  • Condition:  new
£ 2,31
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
VEMO V99-75-0020 Idle speed control valve Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1993
VEMO Q+, original equipment manufacturer quality V99-75-0020 Spark plug 1 - Earthed Electrode
Article No.: V99-75-0020
More
  • Spark Plug: 1 - Earthed Electrode
  • Electrode Gap [mm]: 1,1
  • Product line: Q+, original equipment manufacturer quality
  • Specification: Recommended
  • Weight [kg]: 0,06
  • Packaging width [cm]: 8,5
  • Packaging height [cm]: 2,4
  • Packaging Depth [cm]: 2,4
  • Condition:  new
£ 3,64
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
BERU Z16 Idle control valve, air supply Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1992
BERU ULTRA Z16 Spark plug SAE, 1 - Earthed Electrode, with gasket seat
Article No.: Z16
More
  • Spanner Size: 16 mm
  • Thread Length [mm]: 19
  • Spark Plug: 1 - Earthed Electrode, with gasket seat
  • Thread Size: M14x1,25
  • Electrode Gap [mm]: 1,1
  • Product line: ULTRA
  • Connector type: SAE
  • Required quantity: 4
  • Self-service suited packaging see parts list
  • Technical Information Number: 14 FR-7 DUX
  • Tightening torque from [Nm]: 20
  • Tightening torque to [Nm]: 30
  • Condition:  new
£ 4,78
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
goCORE GCF860032 Idle air control valve Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1993
goCORE GCF860032 Spark plug Fuel Type: CNG/LPG
Article No.: GCF860032
More
    • Engine Code: 4G93 Kat.
    • Fuel Type: CNG/LPG
    • Replace after km: 30000
    • Required quantity: 4
  • Spanner Size: 16 mm
  • Thread Length [mm]: 19
  • Spark Position [mm]: 4
  • Thread Size: M 14 x 1,25
  • Electrode Gap [mm]: 0,7
  • Tightening Torque [Nm]: 28
  • Number of pins: 1
  • Condition:  new
£ 18,95
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
FILTRON OP617 Idle speed control valve Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1992
FILTRON OP617 Oil filter Spin-on Filter
Article No.: OP 617
More
  • Filter type: Spin-on Filter
  • Height [mm]: 75
  • Thread Size: M20x1.5
  • Inner Diameter 2 [mm]: 63, 55
  • Diameter [mm]: 83
  • EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
  • Condition:  new
£ 5,46
incl. 20% VAT, delivery costs
In stock
- +
RIDEX 686S0003 Idle control valve, air supply Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1993
RIDEX 686S0003 Spark plug Fuel Type: CNG/LPG, 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector, Electrode gap must be set for operation on gas
Article No.: 686S0003
More
    • Engine Code: 4G93 Kat.
    • Fuel Type: CNG/LPG
    • Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
    • Replace after km: 15000
    • Required quantity: 4
  • Spanner Size: 16 mm
  • Thread Length [mm]: 19
  • Spark Position [mm]: 3
  • Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
  • Thread Size: M 14 x 1,25
  • Electrode Gap [mm]: 0,9
  • Tightening Torque [Nm]: 28
  • Number of pins: 1
  • Condition:  new
£ 2,44
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
RIDEX PLUS 686S0003P Idle air control valve Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1992
RIDEX PLUS Nickel 686S0003P Spark plug Fuel Type: CNG/LPG, Nickel-Copper Center Electrode, Nickel mass electrode, Electrode gap must be set for operation on gas
Article No.: 686S0003P
More
    • Engine Code: 4G93 Kat.
    • Fuel Type: CNG/LPG
    • Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
    • Replace after km: 15000
    • Required quantity: 4
  • Spanner Size: 16 mm
  • Thread Length [mm]: 19
  • Spark Position [mm]: 3
  • Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
  • Thread Size: M 14 x 1,25
  • Electrode Gap [mm]: 0,8
  • Product line: Nickel
  • Number of pins: 1
  • Resistor [kOhm]: 6
  • Spark Plug Head: Fixed SAE connector
  • Condition:  new
£ 2,87
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
KAVO PARTS MO-511 Idle speed control valve Mitsubishi Lancer 4 1.8GTi 16V (C69A) 140 HP 1993
KAVO PARTS MO-511 Oil filter Spin-on Filter
Article No.: MO-511
More
  • Filter type: Spin-on Filter
  • Height [mm]: 87
  • Thread Size: M20 P1.5
  • Diameter [mm]: 71
  • Manufacturer Restriction: TORO FILTER, Nihon Denso Group
  • Condition:  new
£ 6,30
incl. 20% VAT, delivery costs
In stock
- +

This article has been added to your basket

20 items found