
Blower control unit for DAEWOO Nubira Saloon (J100) 2.0 110 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Blower control unit for your DAEWOO Nubira Saloon (J100) 2.0 C20SED 81 kW from 06.1999

High quality car parts for your DAEWOO at low prices

Article No.: SKSP-19990308
More
- electrode gap to be set [mm]: 0,9
- Construction Year to: 06/2003
- Required quantity: 4
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details

Article No.: VP00500
More
- Fitting Position: Passenger Side, Driver side
- Length [mm]: 500
- Length [inch]: 20
- Wiper blade type: Flat wiper blade
- Fastening Type: Hook fixing
- Condition: new
Read the product details

Article No.: 9XW 178 878-221
More
- Fitting Position: Front, Driver side
- Length [mm]: 550
- Length [inch]: 22
- Quantity: 1
- Wiper blade type: Bracket wiper blade
- Product line: Metal Wiper
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details

Article No.: SKSP-1990009
More
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details

Article No.: 0 242 235 663
More
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details

Article No.: 686S0007P
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 5,7
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,0
- Product line: Nickel
- Resistor [kOhm]: 8
- Condition: new
Read the product details

Article No.: 39-0009
More
- Fitting Position: Front, Driver side
- Length [mm]: 550
- Length [inch]: 22
- Wiper blade type: Flat wiper blade
- Condition: new
Read the product details

Article No.: SKSP-1990006
More
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Fixed SAE connector
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,0
- Tightening Torque [Nm]: 28
- Number of pins: 2
- Tightening angle [degrees]: 90
- Condition: new
Read the product details

Article No.: 0 242 229 656
More
- electrode gap to be set [mm]: 0,9
- Construction Year to: 06/2003
- Required quantity: 4
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details

Article No.: SKSP-1990068
More
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,8
- Quantity: 4
- Quantity Unit: Kit
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details