Control arm from VAICO for TVR TUSCAN
Wishbone VAICO for all TVR TUSCAN car models
Tuscan II Roadster
Best producers of high-quality Control arm for TVR TUSCAN
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for TVR TUSCAN
CHIMAERA- GRIFFITH
- CERBERA
- S
- 280
- 350
- TAMORA
- TASMIN
- SAGARIS
- 400
Most wanted products in Control arm VAICO for your TVR TUSCAN
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0463
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0462
£ 52,70
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Upper Front Axle
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V24-7106
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 17,4
- Packaging height [cm]: 9,1
- Packaging Depth [cm]: 19,5
- Condition: new
VAICO | V24-7105
£ 30,17
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Left, Rear
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 395
- Supplementary Info: Original VAICO Quality
- paired article number: V30-7338
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- for OE number: 211 330 9107
- Width [mm]: 100,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-7337
£ 51,35
Condition: new
Suspension arm VAICO
- Fitting Position: Lower Front Axle, Right
- Material: Cast Steel, Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V42-0031
- Thread Size: Pinch Bolt 18mm
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 375,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 36,8
- Packaging height [cm]: 6,55
- Condition: new
VAICO | V42-0032
£ 39,96
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0098
- Weight [kg]: 2,5
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,2
- Packaging height [cm]: 6,2
- Condition: new
VAICO | V46-0097
£ 33,98
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Grey Cast Iron, Steel
- Control/Trailing Arm Type: Control Arm
- Height [mm]: 85
- Supplementary Info: Original VAICO Quality
- paired article number: V30-0772
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 85,0
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-0771
£ 41,11
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Rear Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 415
- Axle alignment required after fitting
- Condition: new
VAICO | V30-3411
£ 90,06
Condition: new
Suspension arm VAICO
- Fitting Position: Right Front, Lower Front Axle
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- paired article number: V20-7159-1
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Alternatively
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 15,9
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 46,6
- Condition: new
VAICO | V20-7160-1
£ 52,45
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V22-0040
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 6,5
- Packaging height [cm]: 7,8
- Packaging Depth [cm]: 12,5
- Condition: new
VAICO | V22-0041
£ 36,33
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7239
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 5,5
- Packaging Depth [cm]: 42
- Condition: new
VAICO | V10-7238
£ 50,38
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V20-0294
- Thread Size 1: M12x1,5
- Thread Size 2: M14x1,5
- Supplementary Article / Supplementary Info Info 2: without rubber mount(s)
- Weight [kg]: 2,98
- Vehicle Equipment: for vehicles with Xenon light, for vehicles without xenon light
- Supplementary Article / Supplementary Info: without holder
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,1
- Packaging height [cm]: 14,4
- Condition: new
VAICO | V20-0293
£ 64,23
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0504
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 7
- Packaging Depth [cm]: 37
- Condition: new
VAICO | V40-0505
£ 55,44
Condition: new
