Control arm from VAICO for TVR 400
Wishbone VAICO for all TVR 400 car models
400SE
Best producers of high-quality Control arm for TVR 400
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for TVR 400
CHIMAERA- GRIFFITH
- CERBERA
- S
- TUSCAN
- 280
- 350
- TAMORA
- TASMIN
- SAGARIS
Most wanted products in Control arm VAICO for your TVR 400
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: EXPERT KITS +
- paired article number: V10-7298
- Thread Size: M12x1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,037
- Quantity Unit: Set
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 39,5
- Packaging height [cm]: 4
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V10-7299
£ 42,20
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V20-0294
- Thread Size 1: M12x1,5
- Thread Size 2: M14x1,5
- Supplementary Article / Supplementary Info Info 2: without rubber mount(s)
- Weight [kg]: 2,98
- Vehicle Equipment: for vehicles with Xenon light, for vehicles without xenon light
- Supplementary Article / Supplementary Info: without holder
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,1
- Packaging height [cm]: 14,4
- Condition: new
VAICO | V20-0293
£ 64,23
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7239
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 5,5
- Packaging Depth [cm]: 42
- Condition: new
VAICO | V10-7238
£ 50,38
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7238
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 5,5
- Packaging Depth [cm]: 42
- Condition: new
VAICO | V10-7239
£ 50,38
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0115
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 23,5
- Condition: new
VAICO | V46-0114
£ 29,80
Condition: new
Suspension arm VAICO
- Fitting Position: Lower Front Axle, Right
- Material: Cast Steel, Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V42-0031
- Thread Size: Pinch Bolt 18mm
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 375,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 36,8
- Packaging height [cm]: 6,55
- Condition: new
VAICO | V42-0032
£ 39,96
Condition: new
Link Set, wheel suspen...
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Axle alignment required after fitting
- Weight [kg]: 5,075
- Supplementary Info: EXPERT KITS +
- Packaging width [cm]: 26,9
- Packaging height [cm]: 16,7
- Packaging Depth [cm]: 46,2
- Condition: new
VAICO | V20-1982
£ 208,99
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 32
- Packaging height [cm]: 4
- Packaging Depth [cm]: 38
- Condition: new
VAICO | V10-7160
£ 38,99
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0098
- Weight [kg]: 2,5
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,2
- Packaging height [cm]: 6,2
- Condition: new
VAICO | V46-0097
£ 33,98
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Rear Axle Upper, Rear
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 338
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 1,218
- Rod/Strut: Push Rod
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V20-9511
£ 25,54
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Left, Rear
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 395
- Supplementary Info: Original VAICO Quality
- paired article number: V30-7338
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- for OE number: 211 330 9107
- Width [mm]: 100,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-7337
£ 51,35
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0504
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 7
- Packaging Depth [cm]: 37
- Condition: new
VAICO | V40-0505
£ 55,44
Condition: new
