Control arm from VAICO for TVR CHIMAERA
Wishbone VAICO for all TVR CHIMAERA car models
Chimaera Convertible
Best producers of high-quality Control arm for TVR CHIMAERA
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for TVR CHIMAERA
GRIFFITH- CERBERA
- S
- TUSCAN
- 280
- 350
- TAMORA
- TASMIN
- SAGARIS
- 400
Most wanted products in Control arm VAICO for your TVR CHIMAERA
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0098
- Weight [kg]: 2,5
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,2
- Packaging height [cm]: 6,2
- Condition: new
VAICO | V46-0097
£ 39,80
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0115
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 23,5
- Condition: new
VAICO | V46-0114
£ 35,69
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Cast Steel, Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V30-7337
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-7338
£ 60,16
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0462
- Weight [kg]: 3,397
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0463
£ 59,44
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Grey Cast Iron, Steel
- Control/Trailing Arm Type: Control Arm
- Height [mm]: 85
- Supplementary Info: Original VAICO Quality
- paired article number: V30-0772
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 85,0
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-0771
£ 45,96
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Left, Rear
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 395
- Supplementary Info: Original VAICO Quality
- paired article number: V30-7338
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- for OE number: 211 330 9107
- Width [mm]: 100,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-7337
£ 64,28
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V22-0040
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 6,5
- Packaging height [cm]: 7,8
- Packaging Depth [cm]: 12,5
- Condition: new
VAICO | V22-0041
£ 43,52
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Rear Axle Upper, Rear
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 338
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 1,218
- Rod/Strut: Push Rod
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V20-9511
£ 30,58
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0114
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 24
- Condition: new
VAICO | V46-0115
£ 31,34
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0463
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0462
£ 59,08
Condition: new
Suspension arm VAICO
- Fitting Position: Lower Front Axle, Right
- Material: Cast Steel, Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V42-0031
- Thread Size: Pinch Bolt 18mm
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 375,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 36,8
- Packaging height [cm]: 6,55
- Condition: new
VAICO | V42-0032
£ 38,75
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0097
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41,5
- Packaging height [cm]: 49
- Condition: new
VAICO | V46-0098
£ 39,80
Condition: new
