Steering rack from LAUBER for HYUNDAI ix35
Rack and pinion LAUBER for all HYUNDAI ix35 car models
ix35 (LM, EL, ELH)
ix35 Van
Best producers of high-quality Steering rack for HYUNDAI ix35
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for HYUNDAI ix35
i30
i10
i20
TUCSON
SANTA FE
i40
GETZ
COUPE
IONIQ
H-1 Box
Most wanted products in Steering rack LAUBER for your HYUNDAI ix35
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Mobis
- Length [mm]: 1050
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 103
- Overall Length [mm]: 1050
- Condition: new
LAUBER | 69.9973
£ 174,59
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Colour: grey
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1115
- Number of Teeth on input shaft: 36
- Condition: new
LAUBER | 66.1010
£ 392,60
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: MANDO
- Length [mm]: 1230
- Axle Joint Thread Size: M14
- Manufacturer Restriction: MANDO
- Overall Length [mm]: 1225
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Number of Teeth on input shaft: 36
- Condition: Remanufactured
LAUBER | 66.2021
£ 289,19
Condition: Remanufactured
Steering rack LAUBER
- Production Number: D-GA053
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: MANDO
- Axle Joint Thread Size: M16x1,5
- Overall Length [mm]: 1105
- Input shaft height [mm]: 75
- Number of Teeth on input shaft: 36
- Connector type: wielorowek
- Condition: new
LAUBER | 66.9749
£ 161,64
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: MANDO
- Axle Joint Length [mm]: 170
- Input shaft connector type: toothed
- Number of Teeth on input shaft: 36
- Input shaft height [mm]: 34
- Input Shaft Diameter [mm]: 16,6
- Thread Size: M14x1,5 / M16x1,5
- Vehicle Equipment: for vehicles with servotronic steering
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1120
- Connector type: wielorowek
- Condition: new
LAUBER | 66.9762
£ 120,54
Condition: new
Steering rack LAUBER
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Length [mm]: 1461
- Exchange Part
- Overall Length [mm]: 1461
- Condition: Remanufactured
LAUBER | 69.9603
£ 216,89
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.2929
£ 281,36
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1180
- Exchange Part
- Plug Type ID: VALEO
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Connector type: verzahnt
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 64
- Number of Teeth on input shaft: 22
- Condition: Remanufactured
LAUBER | 66.9289
£ 207,85
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Exchange Part
- Total Length [mm]: 1188
- Manufacturer Restriction: DELPHI
- Axle Joint Thread Size: M12x1,5
- Overall Length [mm]: 1188
- Condition: Remanufactured
LAUBER | 69.4040
£ 120,34
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1060
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 60
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9083
£ 218,07
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Axle Joint Thread Size: M16x1,5
- Overall Length [mm]: 1200
- Input shaft height [mm]: 50
- Number of Teeth on input shaft: 36
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.6551
£ 317,96
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: JTEKT
- Overall Length [mm]: 1060
- Input shaft height [mm]: 85
- Input Shaft Diameter [mm]: 18,5
- Number of mounting bores: 2
- External Thread [mm]: M14 x 1.5
- Stroke [mm]: 170
- Code Letter: 60DHKM, 60LYAM
- Observe service information
- Exchange Part
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.4147
£ 277,67
Condition: Remanufactured
