Steering rack from LAUBER for HYUNDAI i40
Rack and pinion LAUBER for all HYUNDAI i40 car models
i40 Estate (VF)
i40 Saloon (VF)
Best producers of high-quality Steering rack for HYUNDAI i40
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for HYUNDAI i40
i30
i10
i20
TUCSON
SANTA FE
ix35
GETZ
COUPE
IONIQ
H-1 Box
Most wanted products in Steering rack LAUBER for your HYUNDAI i40
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Mobis
- Length [mm]: 1050
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 103
- Overall Length [mm]: 1050
- Condition: new
LAUBER | 69.9973
£ 174,80
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: MANDO
- Length [mm]: 1230
- Axle Joint Thread Size: M14
- Manufacturer Restriction: MANDO
- Overall Length [mm]: 1225
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Number of Teeth on input shaft: 36
- Condition: Remanufactured
LAUBER | 66.2021
£ 289,52
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Colour: grey
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1115
- Number of Teeth on input shaft: 36
- Condition: new
LAUBER | 66.1010
£ 393,05
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: MANDO
- Axle Joint Length [mm]: 170
- Input shaft connector type: toothed
- Number of Teeth on input shaft: 36
- Input shaft height [mm]: 34
- Input Shaft Diameter [mm]: 16,6
- Thread Size: M14x1,5 / M16x1,5
- Vehicle Equipment: for vehicles with servotronic steering
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1120
- Connector type: wielorowek
- Condition: new
LAUBER | 66.9762
£ 120,68
Condition: new
Steering rack LAUBER
- Production Number: D-GA053
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: MANDO
- Axle Joint Thread Size: M16x1,5
- Overall Length [mm]: 1105
- Input shaft height [mm]: 75
- Number of Teeth on input shaft: 36
- Connector type: wielorowek
- Condition: new
LAUBER | 66.9749
£ 161,82
Condition: new
Steering rack LAUBER
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Length [mm]: 1461
- Exchange Part
- Overall Length [mm]: 1461
- Condition: Remanufactured
LAUBER | 69.9603
£ 217,14
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: TRW
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 60
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.9389
£ 210,16
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1060
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 60
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9083
£ 218,32
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles without servotronic steering
- Observe service information
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1175
- Input shaft height [mm]: 60
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: new
LAUBER | 66.0018
£ 443,89
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Axle Joint Thread Size: M16x1,5
- Overall Length [mm]: 1200
- Input shaft height [mm]: 50
- Number of Teeth on input shaft: 36
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.6551
£ 318,32
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 66.1584
£ 256,21
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Overall Length [mm]: 1040
- Number of Teeth: 54
- Number of Teeth on input shaft: 54
- Manufacturer Restriction: ZF
- Input shaft height [mm]: 40
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.0922
£ 381,98
Condition: Remanufactured
