Steering rack from TRW for HYUNDAI ix35
Rack and pinion TRW for all HYUNDAI ix35 car models
ix35 (LM, EL, ELH)
ix35 Van
Best producers of high-quality Steering rack for HYUNDAI ix35
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for HYUNDAI ix35
i30
i10
i20
TUCSON
SANTA FE
i40
GETZ
COUPE
IONIQ
H-1 Box
Most wanted products in Steering rack TRW for your HYUNDAI ix35
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- for steering manufacturer: SMI
- Overall Length [mm]: 1110
- Input shaft connector type: untoothed
- Observe technical data
- Condition: Remanufactured
TRW | JRM454
£ 220,76
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Observe technical data
- Condition: Remanufactured
TRW | JRM472
£ 231,78
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles with power steering, for vehicles with steering angle sensor at steering column
- Length [mm]: 627
- Observe technical data
- Condition: Remanufactured
TRW | JRP1228
£ 380,83
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Length [mm]: 616
- Number of mounting bores: 2
- Distance of mounting bores [mm]: 412
- Input Shaft Diameter [mm]: 11
- Input shaft height [mm]: 30,5
- Input shaft connector type: toothed
- Exchange Part
- Observe technical data
- Condition: Remanufactured
TRW | JRM549
£ 139,71
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: THYSSEN-KRUPP
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 1165
- Distance of mounting bores [mm]: 264
- Input shaft height [mm]: 30
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Stroke [mm]: 142
- Axle Joint Length [mm]: 145
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: Remanufactured
TRW | JRP1401
£ 734,97
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Length [mm]: 827
- Overall Length [mm]: 1179
- Stroke [mm]: 145
- Input shaft height [mm]: 65
- Input Shaft Diameter [mm]: 15,1
- Input shaft connector type: toothed
- Number of Teeth on input shaft: 22
- Axle Joint Length [mm]: 175
- Axle Joint Thread Size: M14x1,5
- Pressure Line Connection Thread Size: M14x1,5
- Backflow Connector Thread Size: M16x1,5
- Observe technical data
- Exchange Part
- Condition: Remanufactured
TRW | JRP1301
£ 378,85
Condition: Remanufactured
Steering rack TRW
- Steering Gear Type: Rack and Pinion Steering Gear
- Operating Mode: Mechanical
- Vehicle Equipment: for vehicles without power steering
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 574
- Observe technical data
- Exchange Part
- Condition: Remanufactured
TRW | JRM589
£ 133,08
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Manufacturer Exclusion: ZF
- Supplementary Article / Supplementary Info Info 2: without axle joint
- Observe technical data
- Length [mm]: 557
- Input shaft height [mm]: 80
- Thread Size: M16x1.5
- Stroke [mm]: 65
- Condition: Remanufactured
TRW | JRP866
£ 404,68
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1140
- Input shaft height [mm]: 80
- Input shaft connector type: Rectangle
- Version: Generation II
- Observe technical data
- Condition: Remanufactured
TRW | JRP725
£ 346,76
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: THYSSEN KRUPP
- Vehicle Equipment: for vehicles with servotronic steering
- Supplementary Article / Supplementary Info Info 2: without sensor
- Observe technical data
- Condition: Remanufactured
TRW | JRP886
£ 526,75
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1130
- Stroke [mm]: 160
- Input shaft height [mm]: 57
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Distance of mounting bores [mm]: 500
- Mounting points diameter [mm]: 12,2
- Axle Joint Length [mm]: 120
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: new
TRW | JRP1404
£ 663,42
Condition: new
Steering rack TRW
- Operating Mode: Mechanical
- Steering Gear Type: Rack and Pinion Steering Gear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 1075
- Stroke [mm]: 128
- Number of mounting bores: 2
- Input shaft height [mm]: 117
- Number of Teeth: 30
- Input Shaft Diameter [mm]: 17
- Connector Length [mm]: 130
- Thread Size: M14x1,5
- Exchange Part
- Condition: Remanufactured
TRW | JRM625
£ 290,49
Condition: Remanufactured
