Idle air control valve for VOLKSWAGEN Passat B9 Variant (CJ5) 2.0 TDI 4motion 193 HP
change
Select your vehicle
High quality car parts for your VOLKSWAGEN at low prices
Article No.: 100.3309.20
More
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Product line: COAT Z
- Minimum thickness [mm]: 20
- Height [mm]: 49
- Weight [kg]: 6,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: new
Read the product details
Article No.: 600.3262.70
More
- Fitting Position: Front Axle
- for PR number: 1ZI
- Diameter [mm]: 340
- Brake Disc Type: internally vented, Perforated, two-part brake disc, floating brake disc, Aluminium Brake Disc Hub
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Surface: Coated
- Minimum thickness [mm]: 27
- Height [mm]: 50
- Weight [kg]: 9,7
- Machining: Alloyed/High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: new
Read the product details
Article No.: 39129
More
- for PR number: 1ZI
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: internally vented
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49,7
- Brake Disc Thickness [mm]: 30
- Surface: Coated
- Minimum thickness [mm]: 27
- Weight [kg]: 10,6
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: new
Read the product details
Article No.: WFB-26660R
More
- Fitting Position: Driver side
- Fastening Type: Top Lock
- Length [mm]: 660
- Wiper blade type: Flat wiper blade
- Supplementary Article / Supplementary Info Info 2: without integrated washer fluid jet
- Country Specific Design: Great Britain
- Condition: new
Read the product details
Article No.: 09.C306.1X
More
- Fitting Position: Front Axle
- for PR number: 1ZI
- Diameter [mm]: 340
- Brake Disc Type: perforated/vented
- Centering Diameter [mm]: 65, 65,0
- Number of Holes: 9
- Brake Disc Thickness [mm]: 30
- Surface: Coated
- Minimum thickness [mm]: 27,8
- Inner Diameter [mm]: 145,0
- Height [mm]: 50
- Machining: High-carbon
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: new
Read the product details
Article No.: 33 11 0385
More
- for brake disc diameter [mm]: 306
- for PR number: 1ZA
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Length [mm]: 155
- Width [mm]: 67,6
- Thickness 1 [mm]: 16,5
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,900
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with piston clip
- Condition: new
Read the product details
Article No.: F 026 407 327
More
- Filter type: Filter Insert
- Height [mm]: 161
- Inner Diameter 2 [mm]: 21
- Height 1 [mm]: 149
- Diameter [mm]: 47
- Supplementary Article / Supplementary Info: with gaskets/seals
- Outer Diameter 2 [mm]: 29
- Condition: new
Read the product details
Article No.: 9XW 358 053-181
More
- Fitting Position: Front, Passenger Side
- Length [mm]: 450
- Length [inch]: 18
- Quantity: 1
- Wiper blade type: Beam
- Product line: Cleantech
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details
Article No.: 3 397 006 945
More
- Fitting Position: Front, Passenger Side
- Matching Adapter: 4
- Length [mm]: 450
- Length [inch]: 18
- Wiper blade type: Beam
- Product line: Aerotwin
- Condition: new
Read the product details
Article No.: 24.0130-0225.1
More
- Fitting Position: Front Axle
- for PR number: 1ZI
- Diameter [mm]: 340,0
- Brake Disc Type: Vented
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 30,0
- Surface: Coated
- Minimum thickness [mm]: 27,0
- Inner Diameter [mm]: 145,0
- Height [mm]: 49,6
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115/0407
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: new
Read the product details
