
Suspension arm for VW Passat B4 35i 1.9 TDI 90 HP

- Fitting Position: Front Axle
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Base body material: Steel
- Net weight [kg]: 3327
- Condition: new


- Fitting Position: Front Axle Left, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 19
- Weight [g]: 3050
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(2017); -
1 - Trailing arm / Suspension arm bush
(2098); -
1 - Ball Joint
(CX1235); - 1 - Securing Plate, ball joint (4214);
-
1 - Anti-roll bar link
(50261); -
1 - Anti-roll bar link
(5631); -
1 - Anti-roll bar link
(5632);

- Fitting Position: Front Axle, both sides
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Condition: new

- Fitting Position: Front Axle, Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: 28085 01
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Condition: new

- Fitting Position: Front Axle, Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: 28086 01
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Condition: new

- Fitting Position: Front axle both sides
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: without ball joints
- Weight [g]: 3050
- Condition: new

- Fitting Position: Front axle both sides, Lower Front Axle, both sides
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 19
- Weight [g]: 3050
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(17159); -
1 - Trailing arm / Suspension arm bush
(17160); -
1 - Suspension arm
(16621); -
1 - Ball Joint
(2579);

- Fitting Position: Front Axle, Lower
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 438
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Width [mm]: 52
- Condition: new

- Fitting Position: Lower Front Axle, both sides
- Control/Trailing Arm Type: Control Arm
- Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(JBU148); -
1 - Trailing arm / Suspension arm bush
(JBU161);

- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: 78366AL
- Thread Size: M12 x 1,5
- Inner Diameter [mm]: 12
- Condition: new