Propshaft for Opel Kadett E CC 1.6 i (C08, C48, D08, D48) 75 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Propshaft for your OPEL Kadett E CC (T85) 1.6 i (C08, C48, D08, D48) E 16 NZ 55 kW from 09.1986
High quality car parts for your OPEL at low prices
Article No.: 9XW 178 878-181
More
- Fitting Position: Front, Driver side, Passenger Side, Rear
- Length [mm]: 450
- Length [inch]: 18
- Quantity: 1
- Wiper blade type: Bracket wiper blade
- Product line: Metal Wiper
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details
Article No.: 205 043
More
- Spark Plug: 1 - Earthed Electrode
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- for OE number: 12 14 807
- Condition: new
Read the product details
Article No.: V99-75-0012
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Product line: Q+, original equipment manufacturer quality
- Version: VR7EC1
- Length [mm]: 126
- Height [mm]: 51
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: new
Read the product details
Article No.: 7075
More
- Spanner Size: 20,8 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- TecDoc Engine Number: E 16 NZ
- Condition: new
Read the product details
Article No.: CO0017
More
- Filter type: Spin-on Filter
- Height [mm]: 78
- Thread Size: M18X1.5
- Inner Diameter 2 [mm]: 72, 63
- Diameter [mm]: 76
- Weight [kg]: 0,34
- Quantity Unit: Piece
- Condition: new
Read the product details
Article No.: GCF860001
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 4263
More
- Spanner Size: 21
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,30
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,76
- Connector type: SAE
- Specification: Check OE
- Weight [kg]: 0,07
- Resistor [kOhm]: 8
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: new
Read the product details
Article No.: 686S0029P
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3,5
- Spark Plug: Fixed SAE connector, Iridium Middle Electrode, Platinum mass electrode, Interference Suppression 5 kOhm
- Thread Size: M14 x 1,25
- Product line: Iridium
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- TecDoc Engine Number: E 16 NZ
- Condition: new
Read the product details
Article No.: SKSP-1990006
More
- Construction Year from: 09/1987
- Spanner Size: 16 mm
- Replace after km: 60000
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Fixed SAE connector
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,0
- Tightening Torque [Nm]: 28
- Number of pins: 2
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 26W350
More
- Fitting Position: Front
- Length [mm]: 350
- Wiper blade type: Hybrid Wiper Blade
- Condition: new
Read the product details
