
Steering rack for Opel Insignia Saloon 1.4 (69) 140 HP

- Vehicle Equipment: for vehicles without servotronic steering
- not for vehicle configuration line / variant: OPC
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Observe service information
- Condition: new
Core exchange £ 104,49 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles without servotronic steering, for vehicles with steering angle limiter
- Code Letter: NK, NM
- Observe service information
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Condition: Remanufactured
Core exchange £ 155,97 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1250
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 100
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 12
- Outlet Ø [mm]: 12
- Net weight [kg]: 9
- Condition: Remanufactured
Core exchange £ 104,51 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles without servotronic steering
- Code Letter: NA, NC
- Exchange Part
- Condition: Remanufactured
Core exchange £ 207,96 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Construction Year from: 08/2013
- Vehicle Identification Number (VIN) from: E1000001
- Operating Mode: Electronic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: ZF
- Length [mm]: 1252
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Input shaft height [mm]: 120
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 2,8
- Net weight [kg]: 8
- Supplementary Article / Supplementary Info Info 2: Control unit must be re-programmed at vehicle manufacturer
- Condition: Remanufactured
Core exchange £ 51,99 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles without servotronic steering
- Code Letter: NA, NC
- Observe service information
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Condition: Remanufactured
Core exchange £ 155,97 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1250
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Number of steering wheel turns: 2,6
- Net weight [kg]: 9,1
- Condition: Remanufactured
Core exchange £ 104,51 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles with servotronic steering, for vehicles with steering angle limiter
- Code Letter: NP
- Observe service information
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Condition: Remanufactured
Core exchange £ 155,97 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Colour: grey
- Vehicle Equipment: for vehicles with servotronic steering
- Condition: new
Core exchange £ 104,49 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.

- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without sensor
- Vehicle Equipment: for vehicles with power steering
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Length [mm]: 1245
- Input shaft height [mm]: 101
- Input Shaft Diameter [mm]: 20
- Thread Size: M16x1.5
- Stroke [mm]: 158
- Axle Joint Length [mm]: 196
- Axle Joint Thread Size: M16x1,5
- Number of steering wheel turns: 2,6
- Exchange Part
- Observe service information
- Condition: Remanufactured