
Suspension arm for OPEL Astra J Box Body / Hatchback (P10) 1.6 CDTi 136 HP

- Fitting Position: Centre
- Control/Trailing Arm Type: Control Arm
- Weight [kg]: 0,92
- Rod/Strut: Coupling Rod
- Packaging length [cm]: 13,0
- Packaging width [cm]: 5,8
- Packaging height [cm]: 5,0
- Condition: new

- Fitting Position: Front Axle Right, Lower
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- paired article number: QSA2637S
- Condition: new

- Fitting Position: Front Axle Left, Lower
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- paired article number: QSA2638S
- Condition: new

- Fitting Position: Front Axle Right, outer, Lower
- Vehicle Equipment: for vehicles with hydraulic power steering
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 332
- Cone Size [mm]: 20
- paired article number: 211322
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,942
- Mounting Type: Hydro Mount
- as standard
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(271131); -
1 - Trailing arm / Suspension arm bush
(271166);

- Fitting Position: Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: ORIGINAL Quality
- paired article number: 616 050 0034
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- replacement in pairs recommended
- Condition: new
This kit contains the following items:
-
1 - Bush, control arm mounting
(614 610 0010); -
1 - Trailing arm / Suspension arm bush
(614 610 0020);

- Fitting Position: Front Axle, Right, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: OP-TC-10115
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Mounting Type: Hydro Mount
- Packing Type: Box
- Packaging length [cm]: 61
- Packaging width [cm]: 34,5
- Packaging height [cm]: 9
- Condition: new

- Fitting Position: Front Axle, Left, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: OP-TC-10116
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Mounting Type: Hydro Mount
- Packing Type: Box
- Packaging length [cm]: 61
- Packaging width [cm]: 34,5
- Packaging height [cm]: 9
- Condition: new

- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: ORIGINAL Quality
- paired article number: 616 050 0033
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- replacement in pairs recommended
- Condition: new
This kit contains the following items:
-
1 - Bush, control arm mounting
(614 610 0010); -
1 - Trailing arm / Suspension arm bush
(614 610 0020);

- Fitting Position: Lower, Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- paired article number: 9078
- Rod/Strut: Push Rod
- only in connection with: Ball joint+HYDRO SB
- Observe service information
- Version: with HYDRO SB
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(809642); -
2 - Trailing arm / Suspension arm bush
(809646);

- Fitting Position: Lower, Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- paired article number: 9079
- Rod/Strut: Push Rod
- only in connection with: Ball joint+HYDRO SB
- Observe service information
- Version: with HYDRO SB
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(809642); -
2 - Trailing arm / Suspension arm bush
(809646);