Transfer case parts for Opel Astra g f48 1.8 (F08, F48) 110 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Transfer case parts for your OPEL Astra G CC (T98) 1.8 (F08, F48) Z 18 XEL 81 kW from 02.2003
High quality car parts for your OPEL at low prices
Article No.: 686S0002P
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: new
Read the product details
Article No.: W 712/75
More
- Filter type: Spin-on Filter
- Height [mm]: 79
- Thread Size: M18x1.5
- Article number of the recommended special tool: LS 7
- Diameter [mm]: 76
- Engine Number from: 20V00605
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Gasket inside diameter [mm]: 62
- Gasket outside diameter [mm]: 71
- Condition: new
Read the product details
Article No.: HU 611/1 x
More
- Filter type: Filter Insert
- Height [mm]: 78
- Inner Diameter [mm]: 25
- Inner Diameter 2 [mm]: 30
- Diameter [mm]: 59
- Engine Number to: 20V00604
- Supplementary Article / Supplementary Info: with gasket/seal
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Condition: new
Read the product details
Article No.: OE 648/2
More
- Filter type: Filter Insert
- Height [mm]: 80
- Inner Diameter 2 [mm]: 25, 31
- Diameter [mm]: 62
- Engine Number to: 20V00604
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Condition: new
Read the product details
Article No.: FT4970
More
- Engine Code: 20V00605-->
- Filter type: Spin-on Filter
- Height [mm]: 85
- Diameter [mm]: 76
- Diameter 4 [mm]: 72
- Diameter 3 [mm]: 62
- Thread Size 1: M18x1,5
- Condition: new
Read the product details
Article No.: 7O0144
More
- Filter type: Filter Insert
- Height [mm]: 78
- Inner Diameter [mm]: 25
- Diameter [mm]: 62
- Engine Number to: 20V00604
- Supplementary Article / Supplementary Info: with gaskets/seals, with gasket/seal
- Condition: new
Read the product details
Article No.: SKSP-1990006
More
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Fixed SAE connector
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,0
- Tightening Torque [Nm]: 28
- Number of pins: 2
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 0 242 229 648
More
- Supplementary Article / Supplementary Info Info 2: Mostly short distance travel
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,35
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: new
Read the product details
Article No.: OC 405/3
More
- Filter type: Spin-on Filter
- Height [mm]: 79,3, 86,5
- Thread Size: M18x1,5
- Sealing Ring Diameter [mm]: 61,7, 62,0
- Article number of the recommended special tool: OCS 1
- Diameter [mm]: 75,0, 76,0
- Diameter 2 [mm]: 71,0, 72,0
- Tightening Torque [Nm]: 20
- Net Weight [g]: 259, 300
- Packaging width [cm]: 7,85, 8,00
- Packaging length [cm]: 7,9, 8,0
- Packaging height [cm]: 8,05, 8,80
- Condition: new
Read the product details
Article No.: V99-75-0012
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Product line: Q+, original equipment manufacturer quality
- Version: VR7EC1
- Length [mm]: 126
- Height [mm]: 51
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: new
Read the product details
