Steering hose / pipe for Opel Antara 07 2.4 141 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Steering hose / pipe for your OPEL Antara (L07) 2.4 Z 24 XE 104 kW from 07.2006
High quality car parts for your OPEL at low prices
Article No.: 062609000045
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode, with resistor
- Thread Size: M14 x 1.25
- Electrode Gap [mm]: 0,9
- TecDoc Engine Number: Z 24 XE
- Condition: new
Read the product details
Article No.: U20FS-U
More
- Spanner Size: 16 mm
- Thread Length [mm]: 12,7
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M10x1.0
- Product line: Nickel
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter [mm]: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Condition: new
Read the product details
Article No.: 0 242 235 666
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 8EH 188 704-381
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 30
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 40
- Assy./disassy. by qualified personnel required!
- TecDoc Engine Number: Z 24 XE
- Condition: new
Read the product details
Article No.: 0 242 229 654
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 6
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,0
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 2
- Condition: new
Read the product details
Article No.: GCF860001
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: W 712/75
More
- Filter type: Spin-on Filter
- Height [mm]: 79
- Thread Size: M18x1.5
- Article number of the recommended special tool: LS 7
- Diameter [mm]: 76
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Gasket inside diameter [mm]: 62
- Gasket outside diameter [mm]: 71
- Condition: new
Read the product details
Article No.: V99-75-0012
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Product line: Q+, original equipment manufacturer quality
- Version: VR7EC1
- Length [mm]: 126
- Height [mm]: 51
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: new
Read the product details
Article No.: SA-F60
More
- Fitting Position: Front
- Length [mm]: 600
- Specification: 24" POLLICI
- Technical Information Number: Flat
- Condition: new
Read the product details
Article No.: 686S0007P
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 5,7
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,0
- Product line: Nickel
- Required quantity: 4
- Resistor [kOhm]: 8
- Condition: new
Read the product details
