Sway bar for MITSUBISHI Lancer VI Saloon (CJ_, CP_) 1.5 16V (CK2A) 110 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Sway bar for your MITSUBISHI Lancer VI Saloon (CJ_, CP_) 1.5 16V (CK2A) 4G15 (16V) 81 kW from 09.1995
High quality car parts for your MITSUBISHI at low prices
Article No.: 0 242 230 557
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 686S0027P
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Product line: Nickel
- Required quantity: 4
- Resistor [kOhm]: 6
- Condition: new
Read the product details
Article No.: U20FS-U
More
- Spanner Size: 16 mm
- Thread Length [mm]: 12,7
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M10x1.0
- Product line: Nickel
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter [mm]: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Condition: new
Read the product details
Article No.: OE048/R04
More
- Spanner Size: 21 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Electrode Gap [mm]: 1
- Product line: Powersport
- Connector type: M4/SAE
- Required quantity: 4
- Self-service suited packaging see parts list
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN9YC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 11,1
- Packaging width [cm]: 4,65
- Packaging height [cm]: 1,25
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1,5
- Condition: new
Read the product details
Article No.: GCF860004
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 686S0027
More
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,1
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 0 986 452 041
More
- Filter type: Spin-on Filter
- Height [mm]: 87
- Thread Size: M 20 x 1,5
- Bypass Valve Opening Pressure [bar]: 1
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 68
- for OE number: MD360935
- Quantity: 1
- Gasket outside diameter [mm]: 64
- Gasket inside diameter [mm]: 55
- Condition: new
Read the product details
Article No.: UPT8
More
- Required quantity: 4
- Alternatively
- Spanner Size: 21 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Electrode Gap [mm]: 0,9
- Supplementary Info: ULTRA TITAN
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: new
Read the product details
Article No.: SKSP-1990001
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: V99-75-0010
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Product line: Q+, original equipment manufacturer quality
- Version: E7EC1
- Length [mm]: 126
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: new
Read the product details
- Suspension Arm MITSUBISHI Lancer VI Saloon (CJ_, CP_) 1.5 16V (CK2A) 110 hp
- Wheel Bearing MITSUBISHI Lancer VI Saloon (CJ_, CP_) 1.5 16V (CK2A) 110 hp
- Anti Roll Bar Links MITSUBISHI Lancer VI Saloon (CJ_, CP_) 1.5 16V (CK2A) 110 hp
- Ball Joint MITSUBISHI Lancer VI Saloon (CJ_, CP_) 1.5 16V (CK2A) 110 hp
