Blower control unit for MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Blower control unit for your MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 4G13 (12V) 55 kW from 06.1992
High quality car parts for your MITSUBISHI at low prices
Article No.: 0 242 229 687
More
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 6511
More
- TecDoc Engine Number: 4G13 (12V)
- Fuel Mixture Formation: Carburettor
- Spanner Size: 20,8 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat
- Thread Size: M14 x 1,25
- Condition: new
Read the product details
Article No.: 61556
More
- Filter type: Spin-on Filter
- Height [mm]: 92
- Thread Size: M 20 X 1.5
- Inner Diameter 2 [mm]: 54
- Bypass Valve Opening Pressure [bar]: 1
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 66
- Outer Diameter 2 [mm]: 62
- Condition: new
Read the product details
Article No.: SKSP-1990069
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 32100
More
- Filter type: Spin-on Filter
- Height [mm]: 85
- Diameter [mm]: 68
- Weight [kg]: 0,25
- for OE number: 6000605218
- Internal Thread Size: M20 x 1,5
- Condition: new
Read the product details
Article No.: 575005
More
- Fitting Position: Driver side
- Length [mm]: 500
- Length [inch]: 20
- Quantity: 1
- Wiper blade type: Flat wiper blade
- Product line: FIRST MULTICONNECTION
- Adapter enclosed: M+A+B+C, M, A, B, C
- Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
- Fastening Type: Hook fixing, Top Lock, Pin Fixing
- Weight [kg]: 0,19
- Condition: new
Read the product details
Article No.: 298W0136
More
- Fitting Position: Front
- Length [mm]: 500
- Styling: without spoiler
- Quantity: 1
- Wiper blade type: Standard
- Fastening Type: Hook fixing
- Condition: new
Read the product details
Article No.: 7O0012P
More
- Filter type: Spin-on Filter
- Height [mm]: 92
- Thread Size: M 20 X 1.5
- Inner Diameter 2 [mm]: 54
- Bypass Valve Opening Pressure [bar]: 1
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 66
- Outer Diameter 2 [mm]: 62
- Condition: new
Read the product details
Article No.: CET8
More
- Required quantity: 4
- Alternatively
- Spanner Size: 21 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Electrode Gap [mm]: 0,9
- Product line: Aerovantage Spoiler
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: new
Read the product details
- Headlights MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
- Turn Signal Light MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
- Tail Lights MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
- Sensors and Switches MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
- Fog Lights MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
