Glow plug control module for MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Glow plug control module for your MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 4G13 (12V) 55 kW from 06.1992
High quality car parts for your MITSUBISHI at low prices
Article No.: 6511
More
- TecDoc Engine Number: 4G13 (12V)
- Fuel Mixture Formation: Carburettor
- Spanner Size: 20,8 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat
- Thread Size: M14 x 1,25
- Condition: new
Read the product details
Article No.: 0 242 232 505
More
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Supplementary Info: Super 4
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: new
Read the product details
Article No.: 686S0010P
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: new
Read the product details
Article No.: SKSP-19990308
More
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: QTW017
More
- Fitting Position: Passenger Side, Front
- Length [mm]: 432
- Length [inch]: 17
- Fastening Type: Hook fixing
- Condition: new
Read the product details
Article No.: 610/3-OF-PCS-MS
More
- Filter type: Filter Insert
- Height [mm]: 90
- Thread Size: M 20 X 1.5
- Inner Diameter 2 [mm]: 54
- Bypass Valve Opening Pressure [bar]: 1,0
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 66
- Outer Diameter 2 [mm]: 62
- Net weight [kg]: 0,23
- Gross Weight [kg]: 0,25
- Condition: new
Read the product details
Article No.: 0 242 229 687
More
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: SJF50
More
- Fitting Position: Front
- Length [mm]: 500
- Specification: 20" POLLICI
- Technical Information Number: Flat
- Condition: new
Read the product details
Article No.: H97W06
More
- Filter type: Spin-on Filter
- Height [mm]: 66,5
- Thread Size: M20x1.5
- Inner Diameter [mm]: 55
- Diameter [mm]: 69
- Condition: new
Read the product details
Article No.: 64
More
- Spanner Size: 21
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,40
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,1
- Connector type: SAE/M4
- Weight [kg]: 0,07
- Resistor [kOhm]: 5
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: new
Read the product details
- Engine Electrics MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
- Timing Belt Kit MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
- Rocker Cover MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
- Rocker Cover Gasket MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp
