00#
69-0096
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 hp 1989

Heater resistor for MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 GLS (C62A) 86 HP

change

Filter
for Lancer IV Saloon (C6_A, C7_A)

High quality car parts for your MITSUBISHI at low prices

STARK SKSP-1990068 Blower motor resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1989
STARK SKSP-1990068 Spark plug Fuel Type: CNG/LPG, Kit, Electrode gap must be set for operation on gas
Article No.: SKSP-1990068
More
    • Engine Code: 4G15
    • Construction Year from: 06/1992
    • Fuel Type: CNG/LPG
    • Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
    • Replace after km: 15000
    • Required quantity: 4
  • Spanner Size: 20,8
  • External Thread [mm]: 14
  • Thread Length [mm]: 19
  • Spark Position [mm]: 3
  • Thread Pitch [mm]: 1,25
  • Electrode Gap [mm]: 0,8
  • Quantity: 4
  • Quantity Unit: Kit
  • Tightening Torque [Nm]: 28
  • Number of pins: 1
  • Tightening angle [degrees]: 90
  • Condition:  new
£ 9,06
incl. 20% VAT, delivery costs
In stock
- +
HELLA 9XW178878-201 Blower resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1990
HELLA Metal Wiper 9XW178878-201 Wiper blade both sides, Front, 500mm, Bracket wiper blade
Article No.: 9XW 178 878-201
More
    • Fitting Position: both sides, Driver side
    • Matching Adapter: 1
  • Fitting Position: Front
  • Length [mm]: 500
  • Length [inch]: 20
  • Quantity: 1
  • Wiper blade type: Bracket wiper blade
  • Product line: Metal Wiper
  • Left-/right-hand drive vehicles: for left-hand drive vehicles
  • Assy./disassy. by qualified personnel required!
  • Condition:  new
£ 4,50
incl. 20% VAT, delivery costs
In stock
- +
RIDEX PLUS 686S0137P Fan resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1991
RIDEX PLUS Iridium 686S0137P Spark plug Solid SAE, Fuel Type: CNG/LPG, 1 - Earthed Electrode, Iridium Middle Electrode, Nickel mass electrode
Article No.: 686S0137P
More
    • TecDoc Engine Number: 4G15 (12V)
    • Construction Year to: 04/1991
    • Required quantity: 4
    • Fuel Type: CNG/LPG
  • Spanner Size: 20.6
  • Thread Length [mm]: 19
  • Spark Position [mm]: 3,3
  • Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode, Nickel mass electrode
  • Thread Size: M14x1,25
  • Product line: Iridium
  • Connector type: Solid SAE
  • Diameter [mm]: 14
  • Resistor [kOhm]: 6
  • Country Specific Design: Japan
  • Condition:  new
£ 10,94
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
TRICO FX500 Heater blower resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1992
TRICO FLEX FX500 Wiper blade Std Hook, Driver side, 500mm, Beam
Article No.: FX500
More
    • Fitting Position: Driver side
    • Matching Adapter: D
    • Specification: Std Hook
  • Length [mm]: 500
  • Length [inch]: 20
  • Wiper blade type: Beam
  • Product line: FLEX
  • Weight [g]: 120
  • Condition:  new
£ 13,10
incl. 20% VAT, delivery costs
In stock
- +
HELLA 9XW358164-191 Heater fan resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1989
HELLA Easy Set Upgrade 9XW358164-191 Wiper blade Front, 500mm, 500mm, 450mm, Flat wiper blade
Article No.: 9XW 358 164-191
More
  • Fitting Position: Front
  • Length [mm]: 500, 450
  • Quantity: 2
  • Wiper blade type: Flat wiper blade
  • Product line: Easy Set Upgrade
  • Matching Adapter: E3
  • Left-/right-hand drive vehicles: for left-hand drive vehicles
  • Length 1 [inch]: 20
  • Length 2 [inch]: 18
  • Assy./disassy. by qualified personnel required!
  • Condition:  new
£ 15,79
incl. 20% VAT, delivery costs
In stock
- +
VEMO V99-75-0011 Heater blower motor resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1990
VEMO Q+, original equipment manufacturer quality V99-75-0011 Spark plug Fuel Type: CNG/LPG, 1 - Earthed Electrode, Electrode gap must be set for operation on gas
Article No.: V99-75-0011
More
    • Engine Code: 4G15
    • Construction Year from: 06/1992
    • Fuel Type: CNG/LPG
    • Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
    • Replace after km: 15000
  • Spark Plug: 1 - Earthed Electrode
  • Electrode Gap [mm]: 0,7
  • Product line: Q+, original equipment manufacturer quality
  • Length [mm]: 126
  • Packaging width [cm]: 8,5
  • Packaging height [cm]: 2,4
  • Packaging Depth [cm]: 2,4
  • Condition:  new
£ 4,05
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
RIDEX 298W0118 Resistor, interior blower MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1991
RIDEX without spoiler 298W0118 Wiper blade Driver side, Front, 500mm, 500mm, Flat wiper blade, Beam
Article No.: 298W0118
More
  • Fitting Position: Front, Driver side
  • Length [mm]: 500
  • Styling: without spoiler
  • Quantity: 1
  • Wiper blade type: Flat wiper blade, Beam
  • Number of adapters: 3
  • Type: multiconnection
  • Condition:  new
£ 7,86
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
BLUE PRINT AD20HY500 Heater resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1992
BLUE PRINT AD20HY500 Wiper blade Driver side, 500mm, Hybrid Wiper Blade
Article No.: AD20HY500
More
  • Fitting Position: Driver side
  • Length [mm]: 500
  • Length [inch]: 20
  • Wiper blade type: Hybrid Wiper Blade
  • Fastening Type: Hook fixing
  • Weight [kg]: 0,102
  • Condition:  new
£ 12,85
incl. 20% VAT, delivery costs
In stock
- +
MAXGEAR 39-0306 Blower motor resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1989
MAXGEAR 39-0306 Wiper blade Passenger Side, both sides, 454mm, Bracket wiper blade without spoiler
Article No.: 39-0306
More
  • Fitting Position: both sides, Passenger Side
  • Length [mm]: 454
  • Length [inch]: 16
  • Wiper blade type: Bracket wiper blade without spoiler
  • Matching Adapter: U
  • Condition:  new
£ 5,56
incl. 20% VAT, delivery costs
In stock
- +
MEYLE 0295002000 Blower resistor MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5GLS (C62A) 86 HP 1990
MEYLE 0295002000 Wiper blade Driver side, Front, 500mm, Flat wiper blade
Article No.: 029 500 2000
More
    • Fitting Position: Driver side
    • Matching Adapter: 1
  • Fitting Position: Front
  • Length [mm]: 500
  • Length [inch]: 20
  • Wiper blade type: Flat wiper blade
  • Observe service information
  • Condition:  new
£ 10,84
incl. 20% VAT, delivery costs
In stock
- +

This article has been added to your basket

20 items found