Steering linkage for Mitsubishi Lancer 4 1.8 GTi 16V (C69A) 140 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Steering linkage for your MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 GTi 16V (C69A) 4G93 (DOHC 16V) 103 kW from 06.1992
High quality car parts for your MITSUBISHI at low prices
Article No.: GCF860032
More
- Engine Code: 4G93 Kat.
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,7
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 13427
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: with gasket seat, 1 - Earthed Electrode
- Electrode Gap [mm]: 1,1
- Weight [kg]: 0,22
- contains article number: 13425
- External Thread Size: M14 x 1,25
- Condition: new
Read the product details
Article No.: 686S0320
More
- Spanner Size: 16 mm
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Plug: Fixed SAE connector, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Product line: V-Line
- Quantity: 4
- Condition: new
Read the product details
Article No.: V99-75-1020
More
- Spanner Size: 21
- Thread Length [mm]: 19
- Engine Code: 4G93 Kat.
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,7
- Supplementary Info: Q+, original equipment manufacturer quality
- Vehicle Equipment: for vehicles with gas operation
- Condition: new
Read the product details
Article No.: 610/3-OF-PCS-MS
More
- Filter type: Filter Insert
- Height [mm]: 90
- Thread Size: M 20 X 1.5
- Inner Diameter 2 [mm]: 54
- Bypass Valve Opening Pressure [bar]: 1,0
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 66
- Outer Diameter 2 [mm]: 62
- Net weight [kg]: 0,23
- Gross Weight [kg]: 0,25
- Condition: new
Read the product details
Article No.: V99-75-0020
More
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 1,1
- Product line: Q+, original equipment manufacturer quality
- Specification: Recommended
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: new
Read the product details
Article No.: 686S0003P
More
- Engine Code: 4G93 Kat.
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Number of pins: 1
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: new
Read the product details
Article No.: QFL0056
More
- Filter type: Spin-on Filter
- Height [mm]: 85
- Thread Size: M 20X1,5
- Inner Diameter [mm]: 63
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 70
- Condition: new
Read the product details
Article No.: 39-8475
More
- Fitting Position: both sides, Driver side
- Length [mm]: 475
- Length [inch]: 19
- Quantity: 1
- Wiper blade type: Flat wiper blade
- Condition: new
Read the product details
Article No.: FO-316S
More
- Filter type: Spin-on Filter
- Diameter [mm]: 68
- Length [mm]: 86,6
- Internal Thread [mm]: M20 x 1,5
- Fitted Diameter [mm]: 63
- for OE number: 2630002752
- Condition: new
Read the product details
- Inner Tie Rod Mitsubishi Lancer 4 1.8 GTi 16V (C69A) 140 hp
- Steering Rack Boot Mitsubishi Lancer 4 1.8 GTi 16V (C69A) 140 hp
- Steering Rack Mitsubishi Lancer 4 1.8 GTi 16V (C69A) 140 hp
- Steering Damper Mitsubishi Lancer 4 1.8 GTi 16V (C69A) 140 hp
- Steering Hose / Pipe Mitsubishi Lancer 4 1.8 GTi 16V (C69A) 140 hp
