Idler pulley, serpentine belt for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 12V (C12V) 90 HP
change
Select your vehicle
High quality car parts for your MITSUBISHI at low prices
Article No.: COF100110S
More
- Filter type: Spin-on Filter
- Height [mm]: 76
- Thread Size: M20x1.5
- Inner Diameter [mm]: 61
- Diameter [mm]: 80
- Diameter 1 [mm]: 81,5
- Version: w/ Anti-Drain valve, with By-Pass valve
- Packing Type: Box
- Packaging length [cm]: 7,8
- Packaging width [cm]: 7,8
- Packaging height [cm]: 7,8
- Condition: new
Read the product details
Article No.: SKSP-1990053
More
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: W20EPR-U11
More
- Construction Year to: 04/1991
- TecDoc Engine Number: 4G15 (12V)
- Required quantity: 4
- Spanner Size: 20.6 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Product line: Nickel
- Connector type: Solid SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 18822-11091
- alternative item: W20TT
- Condition: new
Read the product details
Article No.: 4824
More
- Spanner Size: 20,8 mm
- Thread Length [mm]: 19,0
- Engine Code: 4G15
- Spark Position [mm]: 3,0
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: new
Read the product details
Article No.: W16EPR-U11
More
- Construction Year from: 05/1991
- TecDoc Engine Number: 4G15 (12V)
- Required quantity: 4
- Spanner Size: 20.6 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Product line: Nickel
- Connector type: Solid SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: MS851417
- alternative item: W16TT
- Condition: new
Read the product details
Article No.: 4263
More
- Spanner Size: 21
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,30
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,76
- electrode gap to be set [mm]: 1,1
- Connector type: SAE
- Weight [kg]: 0,07
- Resistor [kOhm]: 8
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: new
Read the product details
Article No.: OP 617
More
- Filter type: Spin-on Filter
- Height [mm]: 75
- Thread Size: M20x1.5
- Inner Diameter 2 [mm]: 63, 55
- Diameter [mm]: 83
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Condition: new
Read the product details
Article No.: QFL0005
More
- Filter type: Spin-on Filter
- Height [mm]: 75
- Thread Size: M 20X1,5
- Inner Diameter 2 [mm]: 63, 55
- Diameter [mm]: 80
- Condition: new
Read the product details
Article No.: 32100
More
- Filter type: Spin-on Filter
- Height [mm]: 85
- Diameter [mm]: 68
- Weight [kg]: 0,25
- for OE number: 6000605218
- Internal Thread Size: M20 x 1,5
- Condition: new
Read the product details
Article No.: WCB-19480S
More
- Fitting Position: Driver side
- Length [mm]: 480
- Wiper blade type: Bracket wiper blade with spoiler
- not for country specific design: Great Britain
- Condition: new
Read the product details
- Engine Electrics MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 12V (C12V) 90 hp
- Timing Belt Kit MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 12V (C12V) 90 hp
- Rocker Cover MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 12V (C12V) 90 hp
- Rocker Cover Gasket MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 12V (C12V) 90 hp
