00#
69-3749
LAND ROVER Defender Off-Road Convertible (L316) 3.9 4x4 182 hp 1998

Distributor cap for Land Rover Defender Convertible 3.9 4x4 182 HP

change

Filter
for Defender Off-Road Convertible (L316)

High quality car parts for your LAND ROVER at low prices

BOSCH 0451104014 Ignition distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 1998
BOSCH 0451104014 Oil filter Spin-on Filter, with one anti-return valve
Article No.: 0 451 104 014
More
  • Filter type: Spin-on Filter
  • Height [mm]: 110
  • Thread Size: 3/4" 16 UNF-2B
  • Bypass Valve Opening Pressure [bar]: 7
  • Supplementary Article / Supplementary Info Info 2: with one anti-return valve
  • Diameter [mm]: 91
  • Quantity: 1
  • Gasket outside diameter [mm]: 72
  • Gasket inside diameter [mm]: 62
  • Condition:  new
£ 8,40
incl. 20% VAT, delivery costs
In stock
- +
CHAMPION COF100145S Distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 1999
CHAMPION COF100145S Oil filter Spin-on Filter
Article No.: COF100145S
More
  • Filter type: Spin-on Filter
  • Height [mm]: 114
  • Thread Size: 3/4"-16 UNF
  • Inner Diameter [mm]: 72
  • Diameter [mm]: 93
  • Version: w/ Anti-Drain valve, with By-Pass valve
  • Packing Type: Box
  • Packaging length [cm]: 9,5
  • Packaging width [cm]: 9,5
  • Packaging height [cm]: 11,7
  • Condition:  new
£ 9,07
incl. 20% VAT, delivery costs
In stock
- +
DELPHI LP475 Ignition distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 2000
DELPHI LP475 Brake pad set Rear Axle, without accessories, with anti-squeak plate
Article No.: LP475
More
  • Fitting Position: Rear Axle
  • Wear Warning Contact: incl. wear warning contact
  • Height 1 [mm]: 71,7
  • Height 2 [mm]: 71,7
  • Width 2 [mm]: 88,7
  • Width 1 [mm]: 88,7
  • Thickness 1 [mm]: 15,5
  • Thickness 2 [mm]: 15,5
  • WVA Number: 21237, 21514
  • Test Mark: E1 90R-01878/1040
  • Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
  • Supplementary Article / Supplementary Info: without accessories
  • Brake System: AP-Lockheed
  • FMSI Code: D518-7398
  • Friction Lining Material: Semi-Metallic
  • Quantity Unit: Axle Set
  • Condition:  new
£ 20,51
incl. 20% VAT, delivery costs
In stock
- +
JAPKO 51L06 Distributor cap Land Rover Defender Convertible 3.9 4x4 182 hp Petrol 2000
JAPKO 51L06 Distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 1998
JAPKO 51L06 Brake pad set Rear Axle
Article No.: 51L06
More
  • Fitting Position: Rear Axle
  • Length [mm]: 89
  • Height [mm]: 69
  • Thickness [mm]: 14,5
  • WVA Number: 23471
  • Test Mark: ECE R90 APPROVED
  • for OE number: SFP000160
  • Condition:  new
£ 28,43
incl. 20% VAT, delivery costs
In stock
- +
TRICO EF330 Ignition distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 1999
TRICO EF330 Wiper blade Passenger Side, 330mm
Article No.: EF330
More
    • Fitting Position: Passenger Side, Driver side
    • Matching Adapter: HKSTD
    • Left-/right-hand drive vehicles: for right-hand drive vehicles
  • Length [mm]: 330
  • Length [inch]: 13
  • Weight [g]: 69
  • Condition:  new
£ 6,02
incl. 20% VAT, delivery costs
In stock
- +
BERU UPT8 Distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 2000
BERU UPT8 Spark plug SAE/M4, Poly-V Tit, 1 - Earthed Electrode, with gasket seat, ULTRA TITAN
Article No.: UPT8
More
    • Required quantity: 8
    • Alternatively
  • Spanner Size: 21 mm
  • Thread Length [mm]: 19
  • Spark Plug: 1 - Earthed Electrode, with gasket seat
  • Thread Size: M14x1,25
  • Electrode Gap [mm]: 0,9
  • Supplementary Info: ULTRA TITAN
  • Connector type: SAE/M4
  • Quality/ Grade: Poly-V Tit
  • Tightening torque from [Nm]: 20
  • Tightening torque to [Nm]: 30
  • Resistor from [kOhm]: 3
  • Resistor to [kOhm]: 10
  • Condition:  new
£ 5,91
(Price per item)
incl. 20% VAT, delivery costs
In stock
- +
CARPRISS 79041235 Distributor cap Land Rover Defender Convertible 3.9 4x4 182 hp Petrol 2000
CARPRISS 79041235 Ignition distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 1998
CARPRISS 79041235 Wiper blade Comp. con 98% vehic., both sides, with vehicle-specific adaptor, 350mm, Flat wiper blade
Article No.: 79041235
More
  • Fitting Position: both sides
  • Length [mm]: 350
  • Length [inch]: 14
  • Quantity: 1
  • Material: PVC, Rubber
  • Wiper blade type: Flat wiper blade
  • Supplementary Article / Supplementary Info Info 2: with vehicle-specific adaptor
  • Packing Type: Box
  • Quality: Flexible 2.0.
  • Specification: Comp. con 98% vehic.
  • Condition:  new
£ 9,35
incl. 20% VAT, delivery costs
In stock
- +
VALEO 302417 Distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 1999
VALEO 302417 Brake pad set Front Axle, with anti-squeak plate
Article No.: 302417
More
  • Fitting Position: Front Axle
  • Wear Warning Contact: without integrated wear sensor
  • Height [mm]: 69
  • Width [mm]: 127
  • Thickness [mm]: 17
  • WVA Number: 21519
  • Test Mark: ECE-R90
  • Weight [kg]: 1,88
  • Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
  • Brake System: LOCKHEED
  • FMSI Code: D671-7552
  • Condition:  new
£ 24,03
incl. 20% VAT, delivery costs
In stock
- +
STARK SKBP-0011351 Ignition distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 2000
STARK SKBP-0011351 Brake pad set Front Axle
Article No.: SKBP-0011351
More
  • Fitting Position: Front Axle
  • Wear Warning Contact: excl. wear warning contact
  • Length [mm]: 104,9
  • Height [mm]: 74,7
  • Thickness [mm]: 18
  • Quantity Unit: Axle Set
  • fulfils ECE norm: ECE-R90
  • Condition:  new
£ 19,11
incl. 20% VAT, delivery costs
In stock
- +
STARK SKSP-19990308 Distributor cap Land Rover Defender Convertible 3.9 4x4 182 HP 1998
STARK SKSP-19990308 Spark plug Fuel Type: CNG/LPG, Electrode gap must be set for operation on gas
Article No.: SKSP-19990308
More
    • Fuel Type: CNG/LPG
    • Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
    • Replace after km: 15000
    • Required quantity: 8
  • Spanner Size: 20,8
  • External Thread [mm]: 14
  • Thread Length [mm]: 19
  • Spark Position [mm]: 3
  • Thread Pitch [mm]: 1,25
  • Electrode Gap [mm]: 0,8
  • Tightening Torque [Nm]: 28
  • Number of pins: 1
  • Tightening angle [degrees]: 90
  • Condition:  new
£ 10,26
incl. 20% VAT, delivery costs
In stock
- +

This article has been added to your basket

20 items found