Glow plug control module for Jeep Cherokee KJ 3.7 Laredo 204 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Glow plug control module for your JEEP Cherokee III (KJ) 3.7 Laredo EKG 150 kW from 10.2001
High quality car parts for your JEEP at low prices
Article No.: 279000
More
- Fitting Position: Passenger Side
- Matching Adapter: B1
- Fitting Position: Front
- Length [mm]: 480
- Length [inch]: 19
- Quantity: 1
- Wiper blade type: Flat wiper blade
- Quantity Unit: Piece
- Packing Type: Blister Pack
- Condition: new
Read the product details
This kit contains the following items:
- (298000);
- (300110);
- (300210);
-
1 - Adapter, wiper blade
(300310); - (300410);
-
1 - Adapter, wiper blade
(300510); - (300910);
Article No.: 0 242 240 593
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 8EH 188 705-071
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Electrode Gap [mm]: 1,0
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details
Article No.: SKSP-1990027
More
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,7
- Connector type: SAE/M4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: SKWIB-0940188
More
- Fitting Position: Rear
- Length [mm]: 300
- Styling: without spoiler
- Quantity: 1
- Wiper blade type: Standard
- Fastening Type: Hook fixing
- Condition: new
Read the product details
Article No.: ST48
More
- Fitting Position: Passenger Side, Driver side
- Matching Adapter: HKSTD
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Length [mm]: 480
- Length 1 [inch]: 19
- as standard
- Condition: new
Read the product details
Article No.: 0 242 236 542
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Required quantity: 6
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: OP 532/1
More
- Filter type: Spin-on Filter
- Height [mm]: 120
- Thread Size: 3/4-16 UNF
- Inner Diameter 2 [mm]: 70, 62
- Diameter [mm]: 77
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Condition: new
Read the product details
Article No.: CET2
More
- Required quantity: 6
- Alternatively
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Electrode Gap [mm]: 0,9
- Product line: Aerovantage Spoiler
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET2
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: new
Read the product details
Article No.: 686S0028P
More
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3,3
- Spark Plug: Iridium Middle Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,7
- Product line: Iridium
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Condition: new
Read the product details
