Mass air flow sensor (MAF) for Hyundai Getz TB 1.1 63 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Mass air flow sensor (MAF) for your HYUNDAI Getz (TB) 1.1 G4HD 46 kW from 09.2002
High quality car parts for your HYUNDAI at low prices
Article No.: 686S0027P
More
- TecDoc Engine Number: G4HD
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,1
- Product line: Nickel
- Resistor [kOhm]: 6
- Condition: new
Read the product details
Article No.: 8EH 188 705-041
More
- Vehicle configuration line / variant: WARRANTY(+)
- Vehicle type: Getz
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Electrode Gap [mm]: 1,0
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details
Article No.: 686S0085P
More
- TecDoc Engine Number: G4HD
- Required quantity: 4
- Fuel Type: CNG/LPG
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Spark Plug: 1 - Earthed Electrode, Platinum mass electrode, Iridium Middle Electrode
- Thread Size: M14x1.25
- Product line: Iridium
- Connector type: Solid SAE
- Tightening Torque [Nm]: 22
- Resistor [kOhm]: 6
- Country Specific Design: Japan
- Condition: new
Read the product details
Article No.: SA-X35C
More
- Fitting Position: Passenger Side, Rear
- Length [mm]: 350
- Condition: new
Read the product details
Article No.: SKSP-1990013
More
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 1662
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Product line: V-Line
- TecDoc Engine Number: G4HD
- Condition: new
Read the product details
Article No.: RD55
More
- Fitting Position: Driver side
- Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
- Length [mm]: 550
- Length [inch]: 22
- Quantity: 1
- Packing Type: Blister Pack
- Condition: new
Read the product details
Article No.: V99-75-1020
More
- Spanner Size: 21
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,7
- Supplementary Info: Q+, original equipment manufacturer quality
- Vehicle Equipment: for vehicles with gas operation
- Condition: new
Read the product details
Article No.: 610/3-OF-PCS-MS
More
- Filter type: Filter Insert
- Height [mm]: 90
- Thread Size: M 20 X 1.5
- Inner Diameter 2 [mm]: 54
- Bypass Valve Opening Pressure [bar]: 1,0
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 66
- Outer Diameter 2 [mm]: 62
- Net weight [kg]: 0,23
- Gross Weight [kg]: 0,25
- Condition: new
Read the product details
Article No.: SKSP-1990001
More
- TecDoc Engine Number: G4HD
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
