Outside temperature sensor for Daimler XJ X300 Six 4.0 284 HP
change
Select your vehicle
High quality car parts for your DAIMLER at low prices
Article No.: 0 242 240 593
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 686S0028P
More
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3,3
- Spark Plug: Iridium Middle Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,7
- Product line: Iridium
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Condition: new
Read the product details
Article No.: 0 242 236 544
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 1,0
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 7100501
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode
- for OE number: 9618494580
- Condition: new
Read the product details
Article No.: 8EH 188 706-061
More
- Vehicle Identification Number (VIN) from: 853936, 812256
- Vehicle Identification Number (VIN) to: 853935
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details
Article No.: Z15
More
- Required quantity: 8
- electrode gap to be set [mm]: 0,6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Electrode Gap [mm]: 0,8
- Product line: ULTRA
- Connector type: SAE
- Technical Information Number: 14 FR-7 DU
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: new
Read the product details
Article No.: 20968.175.1
More
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Height [mm]: 64
- Width [mm]: 156
- Thickness [mm]: 18
- WVA Number: 20968
- Test Mark: ECE R90 APPROVED
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Brake System: ATE
- Quantity Unit: Axle Set
- Condition: new
Read the product details
Article No.: 686S0072
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 686S0317
More
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,7
- Connector type: SAE/M4
- Quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: V99-75-0010
More
- Construction Year from: 09/1997
- Construction Year to: 08/2002
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Product line: Q+, original equipment manufacturer quality
- Version: E7EC1
- Length [mm]: 126
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: new
Read the product details
