Control arm from VAICO for DAIMLER V8
Wishbone VAICO for all DAIMLER V8 car models
V8
Best producers of high-quality Control arm for DAIMLER V8
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for DAIMLER V8
DART- XJ
- LIMOUSINE
- 2.8 - 5.3
- SUPER EIGHT
Most wanted products in Control arm VAICO for your DAIMLER V8
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V25-0220
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 18
- Packaging height [cm]: 6
- Packaging Depth [cm]: 55
- Condition: new
VAICO | V25-0221
£ 40,70
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V20-0294
- Thread Size 1: M12x1,5
- Thread Size 2: M14x1,5
- Supplementary Article / Supplementary Info Info 2: without rubber mount(s)
- Weight [kg]: 2,98
- Vehicle Equipment: for vehicles with Xenon light, for vehicles without xenon light
- Supplementary Article / Supplementary Info: without holder
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,1
- Packaging height [cm]: 14,4
- Condition: new
VAICO | V20-0293
£ 63,77
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: EXPERT KITS +
- paired article number: V10-7298
- Thread Size: M12x1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,037
- Quantity Unit: Set
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 39,5
- Packaging height [cm]: 4
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V10-7299
£ 41,90
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Rear Axle Upper, Rear
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 338
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 1,218
- Rod/Strut: Push Rod
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V20-9511
£ 25,36
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0098
- Weight [kg]: 2,5
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,2
- Packaging height [cm]: 6,2
- Condition: new
VAICO | V46-0097
£ 33,74
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0097
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41,5
- Packaging height [cm]: 49
- Condition: new
VAICO | V46-0098
£ 32,99
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Grey Cast Iron, Steel
- Control/Trailing Arm Type: Control Arm
- Height [mm]: 85
- Supplementary Info: Original VAICO Quality
- paired article number: V30-0772
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 85,0
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-0771
£ 40,82
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7238
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 5,5
- Packaging Depth [cm]: 42
- Condition: new
VAICO | V10-7239
£ 50,02
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0114
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 24
- Condition: new
VAICO | V46-0115
£ 31,12
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0463
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0462
£ 52,33
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V22-0040
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 6,5
- Packaging height [cm]: 7,8
- Packaging Depth [cm]: 12,5
- Condition: new
VAICO | V22-0041
£ 36,07
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0462
- Weight [kg]: 3,397
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0463
£ 52,65
Condition: new
