Control arm from VAICO for DAIMLER DART
Wishbone VAICO for all DAIMLER DART car models
Dart Convertible
Best producers of high-quality Control arm for DAIMLER DART
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for DAIMLER DART
XJ- V8
- LIMOUSINE
- 2.8 - 5.3
- SUPER EIGHT
Most wanted products in Control arm VAICO for your DAIMLER DART
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0097
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41,5
- Packaging height [cm]: 49
- Condition: new
VAICO | V46-0098
£ 31,28
Condition: new
Suspension arm VAICO
- Fitting Position: Lower Front Axle, Right
- Material: Cast Steel, Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V42-0031
- Thread Size: Pinch Bolt 18mm
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 375,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 36,8
- Packaging height [cm]: 6,55
- Condition: new
VAICO | V42-0032
£ 39,75
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: EXPERT KITS +
- paired article number: V10-7298
- Thread Size: M12x1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,037
- Quantity Unit: Set
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 39,5
- Packaging height [cm]: 4
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V10-7299
£ 41,97
Condition: new
Suspension arm VAICO
- Fitting Position: Upper, Rear Axle
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 283
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Mounting Type: Rubber Mount
- Condition: new
VAICO | V58-0054
£ 47,94
Condition: new
Link Set, wheel suspen...
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Axle alignment required after fitting
- Weight [kg]: 5,075
- Supplementary Info: EXPERT KITS +
- Packaging width [cm]: 26,9
- Packaging height [cm]: 16,7
- Packaging Depth [cm]: 46,2
- Condition: new
VAICO | V20-1982
£ 239,02
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0446
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 2,98
- Supplementary Article / Supplementary Info: with bush
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 34,35
- Packaging height [cm]: 33,1
- Condition: new
VAICO | V40-0445
£ 72,17
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0114
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 24
- Condition: new
VAICO | V46-0115
£ 31,17
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Height [mm]: 130
- Supplementary Info: Original VAICO Quality
- paired article number: V20-0293
- Thread Size 1: M12x1,5
- Thread Size 2: M14x1,5
- Supplementary Article / Supplementary Info Info 2: without rubber mount(s)
- Weight [kg]: 3,018
- Vehicle Equipment: for vehicles with Xenon light, for vehicles without xenon light
- Supplementary Article / Supplementary Info: without holder
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37,7
- Packaging height [cm]: 14,7
- Condition: new
VAICO | V20-0294
£ 63,64
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Rear Axle Upper, Rear
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 338
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 1,218
- Rod/Strut: Push Rod
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V20-9511
£ 25,68
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0098
- Weight [kg]: 2,5
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,2
- Packaging height [cm]: 6,2
- Condition: new
VAICO | V46-0097
£ 33,80
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0462
- Weight [kg]: 3,397
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0463
£ 52,75
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Cast Steel, Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V30-7337
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-7338
£ 53,46
Condition: new
