Steering rack from LAUBER for DODGE DURANGO
Rack and pinion LAUBER for all DODGE DURANGO car models
Durango (DN)
Durango (HB)
Durango (WD)
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for DODGE DURANGO
NITRO
CALIBER
JOURNEY
CHALLENGER- RAM
AVENGER
CHARGER
NEON
Most wanted products in Steering rack LAUBER for your DODGE DURANGO
Steering rack LAUBER
- Operating Mode: Hydraulic
- Condition: new
LAUBER | 66.0054
£ 272,73
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without coupling rod
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1260
- Input shaft height [mm]: 48
- Manufacturer Restriction: ZF
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.0747
£ 274,09
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.2929
£ 337,21
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 69.9015
£ 51,98
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1250
- Input shaft height [mm]: 80
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.0799
£ 343,09
Condition: Remanufactured
Steering rack LAUBER
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Observe service information
- Condition: new
LAUBER | 66.0034
£ 254,11
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: ZF
- Overall Length [mm]: 1190
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.3811
£ 391,37
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1230
- Input shaft height [mm]: 65
- Axle Joint Thread Size: M14x1,5
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.1300
£ 247,62
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1090
- Input shaft height [mm]: 45
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9042
£ 287,66
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Axle Joint Thread Size: M16x1,5
- Overall Length [mm]: 1200
- Input shaft height [mm]: 50
- Number of Teeth on input shaft: 36
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.6551
£ 317,63
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1180
- Exchange Part
- Plug Type ID: VALEO
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Connector type: verzahnt
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 64
- Number of Teeth on input shaft: 22
- Condition: Remanufactured
LAUBER | 66.9289
£ 212,76
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Exchange Part
- Total Length [mm]: 1188
- Manufacturer Restriction: DELPHI
- Axle Joint Thread Size: M12x1,5
- Overall Length [mm]: 1188
- Condition: Remanufactured
LAUBER | 69.4040
£ 120,21
Condition: Remanufactured
Top DODGE DURANGO models
