Steering rack from LAUBER for DODGE CHALLENGER
Rack and pinion LAUBER for all DODGE CHALLENGER car models
Challenger Coupe
Challenger Hardtop
Best producers of high-quality Steering rack for DODGE CHALLENGER
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for DODGE CHALLENGER
NITRO
CALIBER
JOURNEY- RAM
AVENGER
CHARGER
DURANGO
NEON
Most wanted products in Steering rack LAUBER for your DODGE CHALLENGER
Steering rack LAUBER
- Operating Mode: Hydraulic
- Condition: new
LAUBER | 66.0054
£ 272,73
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1060
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 60
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9083
£ 217,85
Condition: Remanufactured
Steering rack LAUBER
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Observe service information
- Condition: new
LAUBER | 66.0034
£ 254,11
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Overall Length [mm]: 1280
- Condition: Remanufactured
LAUBER | 66.1564
£ 286,78
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Internal Thread [mm]: 1/2" UNF MALE
- Condition: Remanufactured
LAUBER | 69.0505
£ 64,93
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Overall Length [mm]: 1040
- Number of Teeth: 54
- Number of Teeth on input shaft: 54
- Manufacturer Restriction: ZF
- Input shaft height [mm]: 40
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.0922
£ 381,15
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1090
- Input shaft height [mm]: 45
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9042
£ 287,66
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Condition: Remanufactured
LAUBER | 66.2922
£ 298,66
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Stroke [mm]: 184
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Overall Length [mm]: 1182
- Input shaft height [mm]: 90
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.4146
£ 233,99
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1250
- Input shaft height [mm]: 80
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.0799
£ 343,09
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: TRW
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 60
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.9389
£ 209,70
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.2929
£ 281,06
Condition: Remanufactured
Top DODGE CHALLENGER models
