Heater matrix from BSG for TOYOTA PRIUS
Heat exchanger BSG for all TOYOTA PRIUS car models
Prius II Liftback (XW20)
Prius III Hatchback (XW30)
Prius Plus (XW40)
Prius I Saloon (XW10)
Prius IV Liftback (XW50)
Prius C Hatchback
Prius PHV Hatchback (_W52_)
Prius Plus (ZVW4)
Prius V (XW60)
Prius I (XW10)
Best producers of high-quality Heater matrix for TOYOTA PRIUS
Other car parts for Heating and ventilation
Thermostat
Water pump
Radiator
Coolant expansion tank
Heater resistor
Expansion tank cap
Choice of other autoparts from the Heating and ventilation category for TOYOTA PRIUS
YARIS
COROLLA
RAV 4
AURIS
AVENSIS
LAND CRUISER
AYGO
HILUX Pick-up
CELICA
ALPHARD
HIACE
MR 2
VERSO
Most wanted products in Heater matrix BSG for your TOYOTA PRIUS
Heater hose BSG
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 440
- Inner Diameter 2 [mm]: 17
- Observe broschure
- Condition: new
BSG | BSG 75-720-146
£ 22,52
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 340
- Inner Diameter 2 [mm]: 19
- Observe broschure
- Condition: new
BSG | BSG 75-720-148
£ 28,73
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 260
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-179
£ 33,89
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 247
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-264
£ 31,18
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 105
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-178
£ 26,69
Condition: new
Heater hose BSG
BSG | BSG 60-720-097
£ 35,67
Condition: new
Heater hose BSG
BSG | BSG 70-720-214
£ 24,41
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 668
- Inner Diameter 2 [mm]: 9, 8
- Observe broschure
- Condition: new
BSG | BSG 75-720-145
£ 23,77
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 330
- Inner Diameter 2 [mm]: 24, 21
- Observe broschure
- Condition: new
BSG | BSG 90-720-322
£ 36,02
Condition: new
Heater hose BSG
- Vehicle Equipment: for vehicles with automatic switch
- Quantity Unit: Piece
- Weight [g]: 205
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 90-720-314
£ 33,83
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 535
- Inner Diameter 2 [mm]: 29, 24
- Observe broschure
- Condition: new
BSG | BSG 90-720-313
£ 68,21
Condition: new
Heater matrix BSG
- Core Width [mm]: 160
- Core Length [mm]: 144
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Aluminium
- Inlet Ø [mm]: 19
- Outlet Ø [mm]: 19
- Condition: new
BSG | BSG 65-520-055
£ 99,37
Condition: new
