Heater matrix from BSG for TOYOTA CELICA
Heat exchanger BSG for all TOYOTA CELICA car models
Celica VII Coupe (T230)
Celica VI Coupe (T200)
Celica V Coupe (T180)
Celica I Coupe (A20)
Celica IV Hatchback (T160)
Celica II Coupe (A40)
Celica II Hatchback (A40)
Celica V Convertible (T180)
Celica IV Coupe (T160)
Celica IV Saloon (T160)
Celica VI Convertible (T200)
Celica III Coupe (A60)
Celica IV Convertible (T160)
Celica III Hatchback (A60)
Best producers of high-quality Heater matrix for TOYOTA CELICA
Other car parts for Heating and ventilation
Thermostat
Water pump
Radiator
Coolant expansion tank
Heater resistor
Expansion tank cap
Choice of other autoparts from the Heating and ventilation category for TOYOTA CELICA
YARIS
COROLLA
RAV 4
AURIS
AVENSIS
LAND CRUISER
AYGO
PRIUS
HILUX Pick-up
ALPHARD
HIACE
MR 2
VERSO
Most wanted products in Heater matrix BSG for your TOYOTA CELICA
Heater matrix BSG
- Core Length [mm]: 234
- Core Width [mm]: 152
- Core Depth [mm]: 40
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Material: Aluminium
- Component Number: BSG 90-530-004
- Condition: new
BSG | BSG 90-530-004
£ 114,47
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 340
- Inner Diameter 2 [mm]: 19
- Observe broschure
- Condition: new
BSG | BSG 75-720-148
£ 28,73
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 105
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-178
£ 26,69
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 410
- Inner Diameter 2 [mm]: 11, 10
- Observe broschure
- Condition: new
BSG | BSG 75-720-143
£ 24,22
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 122
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-177
£ 32,18
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 177
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-266
£ 32,91
Condition: new
Heater matrix BSG
- Core Dimensions: 160 x 190 x 32 mm
- Water Tank Material (radiator): Aluminium
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Core Length [mm]: 1
- Core Width [mm]: 1
- Core Depth [mm]: 1
- Component Number: BSG 65-530-007
- Condition: new
BSG | BSG 65-530-007
£ 103,95
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 247
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-264
£ 31,18
Condition: new
Heater hose BSG
- Fitting Position: Intake Side
- Quantity Unit: Packing Unit
- Weight [g]: 328
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-172
£ 32,43
Condition: new
Heater hose BSG
BSG | BSG 70-720-214
£ 24,41
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 221
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-265
£ 32,72
Condition: new
Heater hose BSG
BSG | BSG 30-720-316
£ 48,92
Condition: new
