Heater matrix from BSG for NISSAN NOTE
Heat exchanger BSG for all NISSAN NOTE car models
Note I (E11, NE11)
Note II Hatchback (E12)
Note III (E13)
Best producers of high-quality Heater matrix for NISSAN NOTE
Other car parts for Heating and ventilation
Thermostat
Water pump
Radiator
Coolant expansion tank
Heater resistor
Expansion tank cap
Choice of other autoparts from the Heating and ventilation category for NISSAN NOTE
QASHQAI
MICRA
X-TRAIL
JUKE
NAVARA
PULSAR
ALMERA
PATROL
NV200
PATHFINDER
LEAF
PRIMERA
Most wanted products in Heater matrix BSG for your NISSAN NOTE
Heater hose BSG
- Fitting Position: Exhaust Side
- Quantity Unit: Piece
- Weight [g]: 201
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-085
£ 26,47
Condition: new
Heater matrix BSG
- Material: Aluminium
- Inlet Ø [mm]: 16
- Outlet Ø [mm]: 16
- Radiator type: Brazed cooling fins
- Core Length [mm]: 150
- Core Width [mm]: 188
- Core Depth [mm]: 26
- Condition: new
BSG | BSG 63-520-016
£ 100,08
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 815
- Inner Diameter 2 [mm]: 24, 19
- Observe broschure
- Condition: new
BSG | BSG 75-720-063
£ 34,60
Condition: new
Heater matrix BSG
- Supplementary Article / Supplementary Info Info 2: with pipe
- Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
- Core Dimensions: 175 x 186 x 26 mm
- Core Length [mm]: 174
- Core Width [mm]: 185
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Condition: new
BSG | BSG 63-520-021
£ 92,97
Condition: new
Heater matrix BSG
- Core Length [mm]: 210
- Core Width [mm]: 158
- Core Depth [mm]: 26
- Condition: new
BSG | BSG 75-530-004
£ 81,20
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 698
- Inner Diameter 2 [mm]: 9,5, 8
- Observe broschure
- Condition: new
BSG | BSG 75-720-144
£ 27,24
Condition: new
Heater matrix BSG
- Core Dimensions: 160 x 190 x 32 mm
- Water Tank Material (radiator): Aluminium
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Core Length [mm]: 1
- Core Width [mm]: 1
- Core Depth [mm]: 1
- Component Number: BSG 65-530-007
- Condition: new
BSG | BSG 65-530-007
£ 103,95
Condition: new
Heater hose BSG
- Fastening Type: for horizontal fastening
- Height [mm]: 43
- Lamp Type: LED
- Width [mm]: 51
- Registration Type: ADR/GGVS approved
- Lens Colour: yellow
- Observe broschure
- Condition: new
BSG | BSG 75-720-091
£ 42,79
Condition: new
Heater matrix BSG
- Core Length [mm]: 234
- Core Width [mm]: 152
- Core Depth [mm]: 40
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Material: Aluminium
- Component Number: BSG 90-530-004
- Condition: new
BSG | BSG 90-530-004
£ 114,47
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 535
- Inner Diameter 2 [mm]: 29, 24
- Observe broschure
- Condition: new
BSG | BSG 90-720-313
£ 68,21
Condition: new
Heater hose BSG
- Net Weight [g]: 370
- Quantity Unit: Piece
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-147
£ 40,62
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 122
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-177
£ 32,18
Condition: new
