Heater matrix from BSG for NISSAN LEAF
Heat exchanger BSG for all NISSAN LEAF car models
Leaf I (ZE0)
Leaf II (ZE1)
Best producers of high-quality Heater matrix for NISSAN LEAF
Other car parts for Heating and ventilation
Thermostat
Water pump
Radiator
Coolant expansion tank
Heater resistor
Expansion tank cap
Choice of other autoparts from the Heating and ventilation category for NISSAN LEAF
QASHQAI
MICRA
X-TRAIL
JUKE
NOTE
NAVARA
PULSAR
ALMERA
PATROL
NV200
PATHFINDER
PRIMERA
Most wanted products in Heater matrix BSG for your NISSAN LEAF
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 815
- Inner Diameter 2 [mm]: 24, 19
- Observe broschure
- Condition: new
BSG | BSG 75-720-063
£ 34,60
Condition: new
Heater matrix BSG
- Supplementary Article / Supplementary Info Info 2: with pipe
- Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
- Core Dimensions: 175 x 186 x 26 mm
- Core Length [mm]: 174
- Core Width [mm]: 185
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Condition: new
BSG | BSG 63-520-021
£ 92,97
Condition: new
Heater matrix BSG
- Core Length [mm]: 210
- Core Width [mm]: 158
- Core Depth [mm]: 26
- Condition: new
BSG | BSG 75-530-004
£ 81,20
Condition: new
Heater matrix BSG
- Material: Aluminium
- Inlet Ø [mm]: 16
- Outlet Ø [mm]: 16
- Radiator type: Brazed cooling fins
- Core Length [mm]: 150
- Core Width [mm]: 188
- Core Depth [mm]: 26
- Condition: new
BSG | BSG 63-520-016
£ 100,08
Condition: new
Heater hose BSG
- Fitting Position: Exhaust Side
- Quantity Unit: Piece
- Weight [g]: 201
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-085
£ 26,47
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 247
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-264
£ 31,18
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 175
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-180
£ 31,84
Condition: new
Heater hose BSG
- Suitable for vehicle type: PC (passenger car)
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 604
- Inner Diameter 2 [mm]: 9, 8
- Observe broschure
- Condition: new
BSG | BSG 75-720-169
£ 26,07
Condition: new
Heater hose BSG
- Fitting Position: Intake Side
- Quantity Unit: Packing Unit
- Weight [g]: 328
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-172
£ 32,43
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 260
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-179
£ 33,89
Condition: new
Heater hose BSG
BSG | BSG 30-720-302
£ 36,18
Condition: new
Heater hose BSG
- Quantity Unit: Piece
- Weight [g]: 221
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
BSG | BSG 75-720-265
£ 32,72
Condition: new
