Cv joint from SPIDAN for VOLKSWAGEN T-CROSS
Joint drive shaft SPIDAN for all VOLKSWAGEN T-CROSS car models
T-Cross (C11_)
Best producers of high-quality Cv joint for VOLKSWAGEN T-CROSS
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for VOLKSWAGEN T-CROSS
GOLF
POLO
TRANSPORTER
PASSAT
TIGUAN
CADDY
TOUAREG
CRAFTER
TOURAN
SCIROCCO
UP
SHARAN
AMAROK
JETTA
Most wanted products in Cv joint SPIDAN for your VOLKSWAGEN T-CROSS
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22497
£ 92,03
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36474
£ 118,63
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 20340
£ 92,91
Condition: new
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22498
£ 82,01
Condition: new
Joint kit, drive shaft...
- Length [mm]: 105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Thread Size: M16X1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 25225
£ 108,58
Condition: new
Joint kit, drive shaft...
- Length [mm]: 97
- External Toothing wheel side: 36
- Internal Toothing wheel side: 33
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 94
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36622
£ 112,72
Condition: new
Joint kit, drive shaft...
- Length [mm]: 100
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 23691
£ 114,11
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 23689
£ 106,13
Condition: new
Joint kit, drive shaft...
- Length [mm]: 88
- External Toothing wheel side: 42
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 67
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 94
- Thread Size: M16x1.5
- Dust Cover: with dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36098
£ 228,09
Condition: new
Joint kit, drive shaft...
- Length [mm]: 99
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Number of Teeth, ABS ring: 48
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 104
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 22901
£ 100,81
Condition: new
Joint kit, drive shaft...
- Length [mm]: 84
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Internal Toothing differential side, conn. to conn. shaft: 34
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 10,58
- Number of bores: 6
- Tripod roller diameter [mm]: 43
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Condition: new
SPIDAN | 24745
£ 100,81
Condition: new
Joint kit, drive shaft...
- Length [mm]: 111
- External Toothing wheel side: 28
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 65
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36066
£ 61,06
Condition: new
