Cv joint from SPIDAN for VOLKSWAGEN SHARAN
Joint drive shaft SPIDAN for all VOLKSWAGEN SHARAN car models
Sharan I (7M8, 7M9, 7M6)
Sharan II (7N1, 7N2)
Sharan VAN (7M)
Best producers of high-quality Cv joint for VOLKSWAGEN SHARAN
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for VOLKSWAGEN SHARAN
GOLF
POLO
TRANSPORTER
PASSAT
TIGUAN
CADDY
TOUAREG
CRAFTER
TOURAN
SCIROCCO
UP
AMAROK
JETTA
Most wanted products in Cv joint SPIDAN for your VOLKSWAGEN SHARAN
Joint kit, drive shaft...
- Length [mm]: 105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 94
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36015
£ 239,51
Condition: new
Joint kit, drive shaft...
- Length [mm]: 84
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Internal Toothing differential side, conn. to conn. shaft: 34
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 10,58
- Number of bores: 6
- Tripod roller diameter [mm]: 43
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Condition: new
SPIDAN | 24745
£ 100,81
Condition: new
Joint kit, drive shaft...
- Length [mm]: 99
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Number of Teeth, ABS ring: 48
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 104
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 22901
£ 100,81
Condition: new
Joint kit, drive shaft...
- Length [mm]: 173
- External Toothing wheel side: 44
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 72
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 103
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36530
£ 179,37
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36510
£ 94,13
Condition: new
Joint kit, drive shaft...
- Length [mm]: 167
- External Toothing wheel side: 38
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 63
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 94
- Thread Size: M20x1.5
- Dust Cover: with dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36104
£ 172,50
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Thread Size: M10x1.5x48
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,20
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22902
£ 91,07
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 22494
£ 71,55
Condition: new
Joint kit, drive shaft...
- Length [mm]: 36
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 122
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 30
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 12,20
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24464
£ 133,87
Condition: new
Joint kit, drive shaft...
- Length [mm]: 97
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 81
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 22763
£ 77,33
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 20340
£ 92,91
Condition: new
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22498
£ 82,01
Condition: new
Top VOLKSWAGEN SHARAN models
- VOLKSWAGEN Sharan II (7N1, 7N2) cv joint
- VOLKSWAGEN Sharan I (7M8, 7M9, 7M6) cv joint
- VOLKSWAGEN Sharan VAN (7M) cv joint
