Con rod bearing from IPSA for HONDA PRELUDE
Rod bearing IPSA for all HONDA PRELUDE car models
Prelude V (BB)
Prelude IV (BB)
Prelude III (BA)
Prelude II (AB)
Prelude I Coupe (SN)
Best producers of high-quality Con rod bearing for HONDA PRELUDE
Other car parts for Engine
Engine oil
Timing belt and water pump
Engine mount
Sump plug
Gaskets
Rocker cover gasket
Choice of other autoparts from the Engine category for HONDA PRELUDE
CIVIC
CR-V
JAZZ
ACCORD
HR-V
FR-V
INSIGHT
STEPWGN
CR-Z
S2000
CITY
INTEGRA
LEGEND
STREAM
Most wanted products in Con rod bearing IPSA for your HONDA PRELUDE
Big End Bearings IPSA
- Material: Aluminium, Steel
- Oversize [mm]: 0,25
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base, with steel back, with aluminium alloy layer, with aluminium compound layer
- Quantity: 4
- Quantity Unit: Set
- for housing diameter [mm]: 48,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,4
- Condition: new
IPSA | CR010001
£ 24,09
Condition: new
Big End Bearings IPSA
- Material: Aluminium, Steel
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base, with steel back, with aluminium alloy layer, with aluminium compound layer
- Quantity: 4
- Quantity Unit: Set
- for housing diameter [mm]: 51,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,5
- Condition: new
IPSA | CR042100
£ 23,25
Condition: new
Big End Bearings IPSA
- Material: Aluminium, Steel
- Oversize [mm]: 0,5
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base, with steel back, with aluminium alloy layer, with aluminium compound layer
- Quantity: 4
- Quantity Unit: Set
- for housing diameter [mm]: 48,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,4
- Condition: new
IPSA | CR010002
£ 24,09
Condition: new
Big End Bearings IPSA
- Material: Aluminium, Steel
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base, with steel back, with aluminium alloy layer, with aluminium compound layer
- Quantity: 4
- Quantity Unit: Set
- for housing diameter [mm]: 48,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,4
- Condition: new
IPSA | CR010000
£ 24,09
Condition: new
Big End Bearings IPSA
- Quantity Unit: Set
- Quantity: 4
- for housing diameter [mm]: 48,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,4
- Undersize [mm]: 0,32
- Supplementary Article / Supplementary Info Info 2: with steel back, with lead/bronze intermediate layer, with nickel diffusion barrier, with surface hardened running layer
- Condition: new
IPSA | CR103810
£ 79,60
Condition: new
Big End Bearings IPSA
- Material: Aluminium, Steel
- Oversize [mm]: 0,25
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base, with steel back, with aluminium alloy layer, with aluminium compound layer
- Quantity: 4
- Quantity Unit: Set
- for housing diameter [mm]: 51,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,5
- Condition: new
IPSA | CR042101
£ 23,25
Condition: new
Big End Bearings IPSA
- Quantity Unit: Set
- for housing diameter [mm]: 51,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,4
- Supplementary Article / Supplementary Info Info 2: with steel back, with lead/bronze intermediate layer, with nickel diffusion barrier, with surface hardened running layer
- Condition: new
IPSA | CR102500
£ 97,70
Condition: new
Big End Bearings IPSA
- Quantity Unit: Set
- for housing diameter [mm]: 48,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,4
- Supplementary Article / Supplementary Info Info 2: with steel back, with lead/bronze intermediate layer, with nickel diffusion barrier, with surface hardened running layer
- Condition: new
IPSA | CR103800
£ 79,60
Condition: new
Big End Bearings IPSA
- Quantity Unit: Set
- Quantity: 5
- for housing diameter [mm]: 51,02
- for wall thickness [mm]: 1,5
- Width [mm]: 19,4
- Undersize [mm]: 0,32
- Supplementary Article / Supplementary Info Info 2: with steel back, with lead/bronze intermediate layer, with nickel diffusion barrier, with surface hardened running layer
- Condition: new
IPSA | CR102510
£ 97,70
Condition: new
Big End Bearings IPSA
- Quantity Unit: Set
- for housing diameter [mm]: 48,02
- for wall thickness [mm]: 1,5
- Width [mm]: 18,5
- Oversize [mm]: 0,25
- Supplementary Article / Supplementary Info Info 2: with steel back, with lead/bronze intermediate layer, with nickel diffusion barrier, with surface hardened running layer
- Surface: Coated
- Condition: new
IPSA | CR136801
£ 102,76
Condition: new
Big End Bearings IPSA
- Material: Aluminium, Steel
- Oversize [mm]: 0,5
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base, with steel back, with aluminium alloy layer, with aluminium compound layer
- Quantity: 4
- Quantity Unit: Set
- for housing diameter [mm]: 45,02
- for wall thickness [mm]: 1,5
- Width [mm]: 18,4
- Condition: new
IPSA | CR050202
£ 26,41
Condition: new
Big End Bearings IPSA
- Quantity Unit: Set
- for housing diameter [mm]: 51,02
- for wall thickness [mm]: 1,5
- Width [mm]: 15,4
- Oversize [mm]: 0,03
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with steel back, with lead/bronze intermediate layer, with nickel diffusion barrier, with surface hardened running layer
- Condition: new
IPSA | CR127401
£ 506,07
Condition: new
