Clutch kit from SACHS PERFORMANCE for NISSAN PATHFINDER
Clutch and flywheel kit SACHS PERFORMANCE for all NISSAN PATHFINDER car models
Pathfinder III (R51)
Pathfinder II (R50)
Pathfinder IV (R52)
Pathfinder I (WD21)
Best producers of high-quality Clutch kit for NISSAN PATHFINDER
Other car parts for Clutch
Clutch master cylinder
Clutch slave cylinder
Flywheel
Clutch release bearing
Clutch cable
Clutch plate
Choice of other autoparts from the Clutch category for NISSAN PATHFINDER
QASHQAI
MICRA
X-TRAIL
JUKE
NOTE
NAVARA
PULSAR
ALMERA
PATROL
NV200
LEAF
PRIMERA
Most wanted products in Clutch kit SACHS PERFORMANCE for your NISSAN PATHFINDER
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: new
SACHS PERFORMANCE | 88...
£ 1721,43
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: new
SACHS PERFORMANCE | 88...
£ 1721,43
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: new
SACHS PERFORMANCE | 88...
£ 1790,09
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: new
SACHS PERFORMANCE | 88...
£ 984,17
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: new
SACHS PERFORMANCE | 88...
£ 1410,22
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: new
SACHS PERFORMANCE | 88...
£ 1465,32
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 24
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Product line: Performance
- Hub Profile: 25 x 23 - 24
- reinforced version
- Max. transferable engine torque [Nm]: 600
- Clutch Type: rigid sintered disc
- Condition: new
SACHS PERFORMANCE | 88...
£ 983,08
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 24
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Product line: Performance
- Hub Profile: 25 x 23 - 24
- reinforced version
- Max. transferable engine torque [Nm]: 510
- Clutch Type: Rigid clutch disc with organic surfaces
- Condition: new
SACHS PERFORMANCE | 88...
£ 485,00
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: new
SACHS PERFORMANCE | 88...
£ 1161,89
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: new
SACHS PERFORMANCE | 88...
£ 4215,22
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: new
SACHS PERFORMANCE | 88...
£ 4633,88
Condition: new
Clutch kit SACHS PERFO...
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Product line: Performance
- Hub Profile: 21,8 x 24,2 - 23
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: new
SACHS PERFORMANCE | 88...
£ 1956,72
Condition: new
