Select your engine (type)
Clutch kit for Ford Grand C Max 2010 - 2019
Select by fuel type
- Clutch kit Ford Grand C Max 1.0 EcoBoost 100 HP
- Clutch kit Ford Grand C Max 1.0 EcoBoost 100 HP
- Clutch kit Ford Grand C Max 1.0 EcoBoost 125 HP
- Clutch kit Ford Grand C Max 1.0 EcoBoost 125 HP
- Clutch kit Ford Grand C Max 1.5 EcoBoost 150 HP
- Clutch set Ford Grand C Max 1.5 EcoBoost 182 HP
- Clutch set Ford Grand C Max 1.6 EcoBoost 150 HP
- Clutch set Ford Grand C Max 1.6 EcoBoost 182 HP
- Clutch set Ford Grand C Max 1.6 Ti 86 HP
- Clutch set Ford Grand C Max 1.6 Ti 105 HP
- C-MAX 1.6 Ti 125 HP
More
- Clutch kit Ford Grand C Max 1.5 TDCi 95 HP
- Clutch kit Ford Grand C Max 1.5 TDCi 120 HP
- Clutch kit Ford Grand C Max 1.6 TDCi 95 HP
- Clutch kit Ford Grand C Max 1.6 TDCi 115 HP
- Clutch kit Ford Grand C Max 2.0 TDCi 115 HP
- Clutch set Ford Grand C Max 2.0 TDCi 136 HP
- Clutch set Ford Grand C Max 2.0 TDCi 140 HP
- Clutch set Ford Grand C Max 2.0 TDCi 150 HP
- Clutch set Ford Grand C Max 2.0 TDCi 163 HP
- Clutch set Ford Grand C Max 2.0 TDCi 170 HP
More
Other Clutch spares for Ford Grand C Max
- Ford Grand C Max Clutch master cylinder
- Ford Grand C Max Clutch slave cylinder
- Ford Grand C Max Flywheel
- Ford Grand C Max Clutch release bearing
- Ford Grand C Max Clutch cable
- Ford Grand C Max Clutch plate
- Ford Grand C Max Clutch pressure plate
Ford Grand C Max clutch kit : the most popular products
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: new
SACHS | 2290 601 126
£ 457,30
Condition: new
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 20
- Hub Profile: 23,2 x 20,1
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: CSC+flywheel, rigid flyw.,screws, CSC
- Condition: new
STATIM | 130.699
£ 218,44
Condition: new
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: new
SACHS | 2290 601 117
£ 429,51
Condition: new
Clutch kit
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26 x 23
- Weight [kg]: 8,029
- for flywheel manufacturer: LUK
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- Condition: new
VALEO | 834161
£ 214,09
Condition: new
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Product line: XTend
- Observe service information
- only available in set
- Condition: new
SACHS | 3000 970 113
£ 147,90
Condition: new
Clutch kit
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26,4 x 23,2
- Weight [kg]: 6,5
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- Condition: new
VALEO | 834579
£ 196,54
Condition: new
Clutch kit
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 8
- Condition: new
LuK | 600 0335 00
£ 407,35
Condition: new
Clutch kit
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8, 19,61
- Mounting Type: Clipped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 28
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: new
VALEO | 837440
£ 430,37
Condition: new
Clutch kit
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: new
LuK | 624 3774 33
£ 249,96
Condition: new
Clutch kit
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: new
LuK | 624 3774 09
£ 176,25
Condition: new
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Product line: ZMS Modul
- Mounting Type: not pre-mounted
- Condition: new
SACHS | 2290 601 104
£ 572,70
Condition: new
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: new
SACHS | 2290 601 123
£ 472,02
Condition: new
