Select your engine (type)
Clutch kit for Fiat Scudo Van 2007 - 2015
Select by fuel type
- Clutch kit Fiat Scudo Van 1.6 D Multijet 90 HP
- Clutch kit Fiat Scudo Van 1.6 D Multijet 90 HP
- Clutch kit Fiat Scudo Van 2.0 D Multijet 120 HP
- Clutch kit Fiat Scudo Van 2.0 D Multijet 128 HP
- Clutch kit Fiat Scudo Van 2.0 D Multijet 136 HP
- Clutch set Fiat Scudo Van 2.0 D Multijet 163 HP
- Clutch set Fiat Scudo Van 2.0 D Multijet 4x4 120 HP
- Clutch set Fiat Scudo Van 2.0 D Multijet 4x4 128 HP
- Clutch set Fiat Scudo Van 2.0 D Multijet 4x4 136 HP
More
Other Clutch spares for Fiat Scudo Van
- Fiat Scudo Van Clutch master cylinder
- Fiat Scudo Van Clutch slave cylinder
- Fiat Scudo Van Flywheel
- Fiat Scudo Van Clutch release bearing
- Fiat Scudo Van Clutch cable
- Fiat Scudo Van Clutch plate
- Fiat Scudo Van Clutch pressure plate
Fiat Scudo Van clutch kit : the most popular products
Clutch kit
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Adjustment: with automatic adjustment
- Condition: new
RIDEX | 479C0391
£ 131,35
Condition: new
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 21
- Hub Profile: 21,4x24,9-21N
- only available in set
- Condition: new
SACHS | 3000 970 149
£ 243,38
Condition: new
Clutch kit
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 21 x 18
- Weight [kg]: 5,73, 5,9
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Clutch Pressure Plate Outer Diameter [mm]: 230
- Condition: new
VALEO | 786077
£ 165,01
Condition: new
Clutch kit
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- Hub Profile: 24,1 x 21,3
- Multi-piece: four-piece
- Weight [kg]: 21,49
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Number of mounting bores: 8
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: new
RIDEX | 479C0118
£ 283,17
Condition: new
Clutch kit
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with bearing(s)
- Hub Profile: 21,5 x 24,3 - 21N
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: new
RIDEX | 479C3532
£ 160,34
Condition: new
Clutch kit
- Diameter [mm]: 235
- Number of Teeth: 18
- Hub Profile: 18,3x20,9-18N
- Multi-piece: three-piece
- Condition: new
RIDEX | 479C0153
£ 105,90
Condition: new
Clutch kit
- Diameter [mm]: 241
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 7,038
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: new
BLUE PRINT | ADP153087
£ 155,88
Condition: new
Clutch kit
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Product line: BR 0241
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 20
- Number of mounting bores: 8
- Condition: new
LuK | 600 0136 00
£ 378,65
Condition: new
Clutch kit
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 21 x 18
- Weight [kg]: 7,29, 6,1
- for flywheel manufacturer: VALEO
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Condition: new
VALEO | 832427
£ 136,86
Condition: new
Clutch kit
- Diameter [mm]: 240
- Number of Teeth: 21
- Hub Profile: 21,4x24,9-21N
- Condition: new
RIDEX | 479C0812
£ 154,33
(Price per item)
Condition: new
Clutch kit
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 20,04
- Number of mounting bores: 8
- only to be used within set
- Tightening Torque [Nm]: 50
- only available in set
- Condition: new
VALEO | 837119
£ 340,42
Condition: new
Clutch kit
- Diameter [mm]: 235
- Number of Teeth: 18
- Hub Profile: 18,3x20,9-18N
- only available in set
- Condition: new
SACHS | 3000 951 561
£ 92,38
Condition: new
