Select your engine (type)
Subframe for Mitsubishi Colt cjo 1995 - 1998
Select by fuel type
- Subframe Mitsubishi Colt cjo 1.3 (CJ1A) 90 HP
- Subframe Mitsubishi Colt cjo 1.5 (CJ2A) 110 HP
- Subframe Mitsubishi Colt cjo 1.8 (CJ5A) 148 HP
- Subframe Mitsubishi Colt cjo 1300 (CJ1A) 82 HP
- Subframe Mitsubishi Colt cjo 1300 GL,GLX (CJ1A) 75 HP
- Beam axle Mitsubishi Colt cjo 1600 (CJ4A) 103 HP
- Beam axle Mitsubishi Colt cjo 1600 GLX (CJ4A) 90 HP
More
Other Suspension spares for Mitsubishi Colt cjo
- Mitsubishi Colt cjo Control arm
- Mitsubishi Colt cjo Anti-roll bar link
- Mitsubishi Colt cjo Wheel hub
- Mitsubishi Colt cjo Wheel bearing
- Mitsubishi Colt cjo Suspension ball joint
- Mitsubishi Colt cjo Anti-roll bar bushes
- Mitsubishi Colt cjo Suspension bushes
- Mitsubishi Colt cjo Gearbox oil and transmission fluid
- Mitsubishi Colt cjo Drive shaft
- Mitsubishi Colt cjo Cv boot
- Mitsubishi Colt cjo Wheel bolts and wheel nuts
- Mitsubishi Colt cjo Cv joint
- Mitsubishi Colt cjo Axle bushes
- Mitsubishi Colt cjo Drive shaft coupling
- Mitsubishi Colt cjo Automatic transmission fluid
Mitsubishi Colt cjo subframe rear and front: the most popular products
Axle Beam
- Fitting Position: Front Axle
- Weight [kg]: 2
- Packaging length [cm]: 71,0
- Packaging width [cm]: 14,2
- Packaging height [cm]: 7,1
- Condition: new
FEBEST | FRAME-CY4A
£ 58,77
Condition: new
Axle Beam
- Fitting Position: Front Axle
- Weight [kg]: 2,08
- Packaging length [cm]: 75,0
- Packaging width [cm]: 14,0
- Packaging height [cm]: 6,5
- Condition: new
FEBEST | FRAME-CW5W
£ 61,73
Condition: new
Cross Rail
- Fitting Position: Lower
- Condition: new
DIEDERICHS | 1014014
£ 32,89
Condition: new
Bump Stop, axle beam
- Height [mm]: 134
- Fitting Position: Rear Axle Upper
- Fitting Position: Rear Axle both sides, Upper
- Height [mm]: 134
- Replace in pairs only
- Condition: new
TOPRAN | 722 694
£ 15,40
Condition: new
Cross Rail
- Fitting Position: Lower, Front
- Condition: new
DIEDERICHS | 2215014
£ 22,22
Condition: new
Cross Rail
- Fitting Position: Lower
- Condition: new
DIEDERICHS | 3405014
£ 48,41
Condition: new
Axle bush
- paired article number: VKDS 478002
- Mounting Type: Hydro Mount
- Condition: new
SKF | VKDS 478002
£ 17,13
Condition: new
Cross Rail
- Quality: Equipart Certified
- Fitting Position: Front
- Section: Lower Section
- Condition: new
VAN WEZEL | 3742681
£ 37,13
Condition: new
Bump Stop, axle beam
- Fitting Position: Upper, Rear Axle both sides
- Replace in pairs only
- Height of bump stop [mm]: 114
- Condition: new
MAXGEAR | 72-3796
£ 11,70
Condition: new
Holder, subframe / agg...
- Fitting Position: Front Axle Right
- Weight [kg]: 0,733
- Rod/Strut: Suspension Rod
- Packaging length [cm]: 27,0
- Packaging width [cm]: 8,0
- Packaging height [cm]: 6,5
- Condition: new
FEBEST | NSL-NM1
£ 33,28
Condition: new
Bump Stop, axle beam
- Fitting Position: Rear Axle both sides
- Height [mm]: 82
- Replace in pairs only
- Condition: new
TOPRAN | 721 802
£ 4,72
Condition: new
Cross Rail
- Fitting Position: Lower
- Condition: new
DIEDERICHS | 6016014
£ 53,48
Condition: new
