Select your engine (type)
Subframe for CHEVROLET Epica KL1 2005 - 2009
Select by fuel type
Other Suspension spares for Epica KL1
- CHEVROLET Epica KL1 Control arm
- CHEVROLET Epica KL1 Anti-roll bar link
- CHEVROLET Epica KL1 Wheel hub
- CHEVROLET Epica KL1 Wheel bearing
- CHEVROLET Epica KL1 Suspension ball joint
- CHEVROLET Epica KL1 Anti-roll bar bushes
- CHEVROLET Epica KL1 Suspension bushes
- CHEVROLET Epica KL1 Gearbox oil and transmission fluid
- CHEVROLET Epica KL1 Drive shaft
- CHEVROLET Epica KL1 Cv boot
- CHEVROLET Epica KL1 Wheel bolts and wheel nuts
- CHEVROLET Epica KL1 Cv joint
- CHEVROLET Epica KL1 Axle bushes
- CHEVROLET Epica KL1 Drive shaft coupling
- CHEVROLET Epica KL1 Automatic transmission fluid
Epica KL1 subframe rear and front: the most popular products
Cross Rail
- Fitting Position: Front
- Section: Lower Section
- Panel Type: Full Body Section
- Weight [kg]: 2,4
- Condition: new
PRASCO | DW3243206
£ 62,19
Condition: new
Cross Rail
- Fitting Position: Lower
- Condition: new
DIEDERICHS | 6931014
£ 43,80
Condition: new
Cross Rail
- Fitting Position: Front
- Section: Lower Section
- Panel Type: Full Body Section
- Condition: new
VAN WEZEL | 0807681
£ 56,02
Condition: new
Bump Stop, axle beam
- Fitting Position: Rear Axle both sides
- Height [mm]: 82
- Replace in pairs only
- Condition: new
TOPRAN | 721 802
£ 4,74
Condition: new
Cross Rail
- Fitting Position: Lower
- Condition: new
DIEDERICHS | 1213014
£ 22,73
Condition: new
Cross Rail
- Fitting Position: Lower
- Condition: new
DIEDERICHS | 6016014
£ 53,67
Condition: new
Bump Stop, axle beam
- Fitting Position: Upper, Rear Axle both sides
- Height [mm]: 134
- Replace in pairs only
- Condition: new
Magnum Technology | A9...
£ 45,65
Condition: new
Bump Stop, axle beam
- Suspension: for vehicles with heavy duty suspension
- Fitting Position: Rear Axle left and right
- Fitting Position: Rear Axle both sides
- Height [mm]: 84
- Suspension: for vehicles with heavy duty suspension
- Replace in pairs only
- Condition: new
TOPRAN | 722 684
£ 10,09
Condition: new
Bump Stop, axle beam
- Fitting Position: Upper Front Axle
- Material: Rubber
- Replace in pairs only
- Condition: new
MAPCO | 33873
£ 5,13
Condition: new
Bump Stop, axle beam
- Height [mm]: 134
- Fitting Position: Rear Axle Upper
- Fitting Position: Rear Axle both sides, Upper
- Height [mm]: 134
- Replace in pairs only
- Condition: new
TOPRAN | 722 694
£ 15,36
Condition: new
Axle bush
- paired article number: VKDS 478002
- Mounting Type: Hydro Mount
- Condition: new
SKF | VKDS 478002
£ 17,21
Condition: new
Bump Stop, axle beam
- Fitting Position: Upper, Rear Axle both sides
- Replace in pairs only
- Height of bump stop [mm]: 114
- Condition: new
MAXGEAR | 72-3796
£ 11,77
Condition: new
