Suspension ball joint from OPTIMAL for DAIMLER V8
Suspension ball joint OPTIMAL for all DAIMLER V8 car models
V8
Best producers of high-quality Suspension ball joint for DAIMLER V8
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for DAIMLER V8
DART- XJ
- LIMOUSINE
- 2.8 - 5.3
- SUPER EIGHT
Most wanted products in Suspension ball joint OPTIMAL for your DAIMLER V8
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 16,7
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-525
£ 81,02
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Cone Size [mm]: 17,5
- Condition: new
OPTIMAL | G3-524
£ 93,30
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17
- Outer Diameter 2 [mm]: 41,3
- Diameter [mm]: 51
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-946
£ 66,77
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15
- Required quantity: 2
- External Thread 2 [mm]: M12 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- External Thread 1 [mm]: M14 x 1,50 RHT M
- Internal Thread [mm]: M12 x 1,25 RHT F
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-927
£ 79,15
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower
- Cone Size [mm]: 15,8
- Cone Pitch: 1/8
- Diameter 1 [mm]: 16
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-110
£ 77,30
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15,5
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,4
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-967
£ 19,26
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Lower
- Cone Size [mm]: 15,4
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 1
- External Thread 2 [mm]: M10 x 1,50 RHT M
- paired article number: G3-956
- Control/Trailing Arm Type: for control arm
- External Thread 1 [mm]: M12 x 1,50 RHT M
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-955
£ 59,25
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Condition: new
OPTIMAL | G3-1088
£ 72,37
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Pitch: 1/8
- Outer Diameter 2 [mm]: 40,1
- Diameter [mm]: 44
- Required quantity: 2
- External Thread [mm]: M12 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Fastening Type: Suspended
- Cone Size 1 [mm]: 16
- Cone Size 2 [mm]: 18,1
- Condition: new
OPTIMAL | G3-1099
£ 58,68
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Cone Pitch: 1/8
- Outer Diameter 2 [mm]: 43,5
- Diameter [mm]: 35,2
- Required quantity: 2
- External Thread [mm]: M10 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Cone Size 1 [mm]: 12,8
- Cone Size 2 [mm]: 14,2
- Notches/Holes Number: 1
- Condition: new
OPTIMAL | G3-1093
£ 26,20
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Outer Diameter 2 [mm]: 43,5
- Diameter [mm]: 49,6
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Mounting Type: Pressed
- Bolt Head Diameter [mm]: 24
- Notches/Holes Number: 1
- Condition: new
OPTIMAL | G3-1047
£ 77,30
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories
- Length [mm]: 100
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Thickness [mm]: 8
- Mounting Type: Bolted
- Number of mounting bores: 3
- Mounting points diameter [mm]: 11
- Cone Size 1 [mm]: 15
- Cone Size 2 [mm]: 18,3
- Condition: new
OPTIMAL | G3-2037S
£ 60,57
Condition: new
