Suspension ball joint from OPTIMAL for DAIMLER SUPER EIGHT
Suspension ball joint OPTIMAL for all DAIMLER SUPER EIGHT car models
Super Eight (X350)
Best producers of high-quality Suspension ball joint for DAIMLER SUPER EIGHT
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for DAIMLER SUPER EIGHT
DART- XJ
- V8
- LIMOUSINE
- 2.8 - 5.3
Most wanted products in Suspension ball joint OPTIMAL for your DAIMLER SUPER EIGHT
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Cone Size [mm]: 17,5
- Condition: new
OPTIMAL | G3-524
£ 93,30
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 16,7
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-525
£ 81,02
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17
- Outer Diameter 2 [mm]: 41,3
- Diameter [mm]: 51
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-946
£ 66,77
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Outer Diameter 2 [mm]: 38,6
- Diameter [mm]: 41,2
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 17,5
- Condition: new
OPTIMAL | G3-1060
£ 37,17
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower
- Cone Size [mm]: 15,8
- Cone Pitch: 1/8
- Diameter 1 [mm]: 16
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-110
£ 77,30
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 19
- Number of mounting bores: 3
- Mounting points diameter [mm]: 8,5
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-080
£ 69,84
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 41,3
- Diameter [mm]: 48,7
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 20
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1034
£ 34,65
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,8
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,8
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1003
£ 73,58
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15,5
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,4
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-967
£ 19,26
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,8
- Alternative Repair Kit: G3-1113
- Condition: new
OPTIMAL | G3-1113S
£ 44,17
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Diameter [mm]: 42,5
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Mounting Type: Pressed
- Bolt Head Diameter [mm]: 20
- Condition: new
OPTIMAL | G3-2024
£ 41,68
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M12 x 1,25 RHT M
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,4
- Cone Size 1 [mm]: 15,8
- Cone Size 2 [mm]: 22,2
- Condition: new
OPTIMAL | G3-2001S
£ 36,50
Condition: new
