
Ignition module for Audi A6 C5 Avant 2.4 163 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Ignition module for your AUDI A6 C5 Avant (4B5) 2.4 AJG 120 kW from 12.1997

High quality car parts for your AUDI at low prices

Article No.: 0 242 240 593
More
- TecDoc Engine Number: AJG
- Construction Year from: 02/1998
- Construction Year to: 07/1998
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- TecDoc Engine Number: APZ, AMM
- Construction Year from: 11/1998
- Construction Year to: 04/2001
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details

Article No.: 686S0003P
More
- TecDoc Engine Number: AJG
- Construction Year from: 02/1998
- Construction Year to: 07/1998
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- TecDoc Engine Number: APZ, AMM
- Construction Year from: 11/1998
- Construction Year to: 04/2001
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Number of pins: 1
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: new
Read the product details

Article No.: GCF860033
More
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector
- Thread Size: M14 x 1,25
- Product line: LPG Laser Line
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: new
Read the product details

Article No.: 686S0029P
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3,5
- Spark Plug: Fixed SAE connector, Iridium Middle Electrode, Platinum mass electrode, Interference Suppression 5 kOhm
- Thread Size: M14 x 1,25
- Product line: Iridium
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: new
Read the product details

Article No.: 9XW 190 253-151
More
- Fitting Position: Front, Rear
- Length [mm]: 375
- Length [inch]: 15
- Quantity: 1
- Wiper blade type: Bracket wiper blade
- Product line: Metal Wiper
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details

Article No.: SKWIB-0940134
More
- Fitting Position: Front
- Length [mm]: 530
- Styling: without spoiler
- Quantity: 1
- Wiper blade type: Standard
- Fastening Type: Hook fixing
- Condition: new
Read the product details

Article No.: SKSP-1990061
More
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,9
- Quantity: 6
- Quantity Unit: Kit
- Tightening Torque [Nm]: 28
- Number of pins: 2
- Tightening angle [degrees]: 90
- Condition: new
Read the product details

Article No.: ST38
More
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Construction Year from: 10/2001
- Construction Year to: 09/2004
- Fastening Type: Hook fixing
- Length [mm]: 380
- Length 1 [inch]: 15
- as standard
- Condition: new
Read the product details

Article No.: SJF53
More
- Fitting Position: Passenger Side
- Length [mm]: 525
- Technical Information Number: Flat
- Condition: new
Read the product details

Article No.: OE237
More
- TecDoc Engine Number: AJG
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Spark Plug: 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Electrode Gap [mm]: 1,6
- Supplementary Info: Screw on
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RC7BYC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: new
Read the product details