Ignition module for Audi A4 Convertible 2.4 170 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Ignition module for your AUDI A4 B6/B7 Convertible (8H7, 8HE) 2.4 BDV 125 kW from 04.2002
High quality car parts for your AUDI at low prices
Article No.: 231-02-029
More
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Height [mm]: 52,9
- Width 1 [mm]: 87,6
- Thickness [mm]: 15,2
- Test Mark: ECE R90
- Brake System: Lucas / TRW
- Assy./disassy. by qualified personnel required!
- Condition: new
Read the product details
Article No.: 79041256
More
- Fitting Position: both sides
- Length [mm]: 550
- Length [inch]: 22
- Quantity: 1
- Material: PVC, Rubber
- Wiper blade type: Flat wiper blade
- Supplementary Article / Supplementary Info Info 2: with vehicle-specific adaptor
- Packing Type: Box
- Quality: Flexible 2.0.
- Specification: Comp. con 98% vehic.
- Condition: new
Read the product details
Article No.: SKSP-19990305
More
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,0
- electrode gap to be set [mm]: 1,35
- Quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Sample photo
Article No.: 062613000036
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 2 - Earthed Electrode, with resistor
- Thread Size: M14 x 1.25
- Electrode Gap [mm]: 1,3
- TecDoc Engine Number: BDV
- Condition: new
Read the product details
Article No.: 686S0005P
More
- Engine Code: BDV
- Quantity: 6
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 5,8
- Spark Plug: 2 - Earthed Electrode, Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M14x1,25
- Product line: Nickel
- Resistor [kOhm]: 8
- Spark Plug Head: Fixed SAE connector
- Condition: new
Read the product details
Article No.: OE237
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Spark Plug: 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Electrode Gap [mm]: 1,6
- Supplementary Info: Screw on
- Connector type: SAE
- Required quantity: 6
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RC7BYC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: new
Read the product details
Article No.: 686S0029P
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3,5
- Spark Plug: Fixed SAE connector, Iridium Middle Electrode, Platinum mass electrode, Interference Suppression 5 kOhm
- Thread Size: M14 x 1,25
- Product line: Iridium
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- TecDoc Engine Number: BDV
- Condition: new
Read the product details
Article No.: CCH9805
More
- Required quantity: 6
- Alternatively
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Electrode Gap [mm]: 1
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: KC8WYPB4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2,5
- Packaging height [cm]: 2,5
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1,5
- Condition: new
Read the product details
Article No.: 686S0003
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: new
Read the product details
Article No.: 16200A
More
- Fitting Position: Driver side
- Matching Adapter: CL
- Additionally required articles (article numbers): 300710
- Fitting Position: Front
- Length [mm]: 560
- Length [inch]: 22
- Quantity: 1
- Wiper blade type: Bracket wiper blade
- Adapter enclosed: B1
- Condition: new
Read the product details
