Ignition module for Audi A4 B6 Avant 2.4 163 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Ignition module for your AUDI A4 B6 Avant (8E5) 2.4 AMM 120 kW from 09.2001
High quality car parts for your AUDI at low prices
Article No.: SKSP-19990318
More
- Spanner Size: 16 mm
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Plug: Fixed SAE connector, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Product line: V-Line
- Quantity: 4
- Condition: new
Read the product details
Article No.: 686S0003P
More
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Number of pins: 1
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: new
Read the product details
Article No.: SJF38
More
- Fitting Position: Rear
- Length [mm]: 380
- Specification: 15" POLLICI
- Technical Information Number: Flat
- Condition: new
Read the product details
Article No.: GCF860006
More
- Engine Code: AMM
- Required quantity: 6
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 2 - Earthed Electrode, Nickel Middle Electrode
- Product line: Nickel
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 43
- Gross Weight [g]: 46
- Condition: new
Read the product details
Article No.: 686S0028
More
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,7
- Connector type: SAE/M4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 16100A
More
- Fitting Position: Passenger Side
- Matching Adapter: CL
- Additionally required articles (article numbers): 300710
- Fitting Position: Front
- Length [mm]: 530
- Length [inch]: 21
- Quantity: 1
- Wiper blade type: Bracket wiper blade
- Adapter enclosed: B1
- Condition: new
Read the product details
Article No.: 26200A
More
- Fitting Position: Driver side
- Matching Adapter: CL
- Additionally required articles (article numbers): 300710
- Fitting Position: Front
- Length [mm]: 560
- Length [inch]: 22
- Quantity: 1
- Wiper blade type: Bracket wiper blade with spoiler
- Adapter enclosed: B1
- Condition: new
Read the product details
Article No.: 39-9550
More
- Fitting Position: both sides
- Matching Adapter: 1
- Fitting Position: Front
- Length [mm]: 550
- Length [inch]: 22
- Wiper blade type: Flat wiper blade
- Number of adapters: 8
- Condition: new
Read the product details
Article No.: SKSP-1990004
More
- Engine Code: AMM
- Quantity: 6
- Required quantity: 6
- Spanner Size: 16 mm
- External Thread [mm]: M14 x 1,25
- Spark Plug: 2 - Earthed Electrode, Nickel Middle Electrode
- Thread Size 1: 19
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 43
- Number of pins: 2
- Condition: new
Read the product details
Article No.: OE237
More
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Spark Plug: 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Electrode Gap [mm]: 1,6
- Supplementary Info: Screw on
- Connector type: SAE
- Required quantity: 6
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RC7BYC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: new
Read the product details
