Suspension arm for Audi A3 8l1 1.8 T 180 HP
- Vehicle Identification Number (VIN) from: 8L-Y-117-501
- Fitting Position: Rear Axle both sides, Upper
- Required quantity: 2
- Control/Trailing Arm Type: Control Arm
- paired article number: VKDS 421020
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Condition: new
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,9
- paired article number: 37470
- Rod/Strut: Push Rod
- only in connection with: Ball joint
- Condition: new
This kit contains the following items:
-
2 - Trailing arm / Suspension arm bush
(863601); -
3 - Trailing arm / Suspension arm bush
(863602); - (37487);
- Fitting Position: Front Axle, both sides, Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(72-0690); -
1 - Trailing arm / Suspension arm bush
(72-1186);
- Fitting Position: Rear Axle Left, Rear Axle Right
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 520
- Weight [kg]: 1,08
- Specification: L520mm
- Condition: new
- Fitting Position: Front Axle, Left, Right, outer, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: L29545
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,600
- Packaging length [cm]: 49
- Packaging width [cm]: 37
- Packaging height [cm]: 9
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(L29808); -
1 - Trailing arm / Suspension arm bush
(L29847); - (L29536);
- Fitting Position: Front Axle, Left, Right, outer, Lower, Upper
- Control/Trailing Arm Type: Control Arm
- paired article number: L29546
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,600
- Packaging length [cm]: 49
- Packaging width [cm]: 37
- Packaging height [cm]: 9
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(L29808); -
1 - Trailing arm / Suspension arm bush
(L29847); - (L29535);
- Fitting Position: Front Axle Left, Front Axle, outer, Left, Right, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: ZWD-VW-039
- Fabrication Number: ZWD-VW-038
- Condition: new
- Fitting Position: Front Axle Right, Front Axle, outer, Left, Right, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: ZWD-VW-038
- Fabrication Number: ZWD-VW-039
- Condition: new
- Fitting Position: Front Axle Left, Lower
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: 20-01071-1
- Weight [kg]: 3,49
- Condition: new
This kit contains the following items:
-
1 - Trailing arm / Suspension arm bush
(37-00325-5); -
1 - Trailing arm / Suspension arm bush
(37-06106-6); -
1 - Ball Joint
(27-01066-2);
- Fitting Position: Lower, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,9
- paired article number: 37470 R
- Rod/Strut: Push Rod
- only in connection with: Ball joint
- Replace in pairs only
- Condition: new
This kit contains the following items:
-
3 - Trailing arm / Suspension arm bush
(837619); -
2 - Trailing arm / Suspension arm bush
(863601); - (37487);
