Control arm from VAICO for VOLKSWAGEN SANTANA
Wishbone VAICO for all VOLKSWAGEN SANTANA car models
Santana Saloon (32B)
Santana Saloon
Best producers of high-quality Control arm for VOLKSWAGEN SANTANA
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for VOLKSWAGEN SANTANA
GOLF
POLO
TRANSPORTER
PASSAT
TIGUAN
CADDY
TOUAREG
CRAFTER
TOURAN
SCIROCCO
UP
SHARAN
AMAROK
JETTA
Most wanted products in Control arm VAICO for your VOLKSWAGEN SANTANA
Suspension arm VAICO
- Fitting Position: both sides, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35,5
- Condition: new
VAICO | V10-7117
£ 28,36
Condition: new
Suspension arm VAICO
- Fitting Position: Rear, Right, Upper Front Axle
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7124
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 4
- Packaging height [cm]: 6,1
- Packaging Depth [cm]: 30
- Condition: new
VAICO | V10-7125
£ 19,66
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7238
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 5,5
- Packaging Depth [cm]: 42
- Condition: new
VAICO | V10-7239
£ 50,38
Condition: new
Suspension arm VAICO
- Fitting Position: Rear Axle, Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: V10-5975
- Condition: new
VAICO | V10-5974
£ 28,37
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: EXPERT KITS +
- paired article number: V10-7299
- Thread Size: M12x1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,037
- Quantity Unit: Set
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 39,5
- Packaging height [cm]: 4
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V10-7298
£ 45,07
Condition: new
Link Set, wheel suspen...
- Fitting Position: Front Axle
- for OE number: 901 330 24 07 kit
- Article number of recommended accessories: V30-1514
- Axle alignment required after fitting
- Weight [kg]: 7,5
- Supplementary Info: EXPERT KITS +
- Packaging width [cm]: 39
- Packaging height [cm]: 9,7
- Packaging Depth [cm]: 46,9
- Condition: new
VAICO | V30-3129
£ 181,32
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 4,6
- Packaging Depth [cm]: 39,5
- Condition: new
VAICO | V10-7090-1
£ 25,91
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: V10-7236-1
- Vehicle Equipment: for vehicles with headlight levelling (electric)
- Alternatively
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 35
- Packaging height [cm]: 8
- Packaging Depth [cm]: 56,5
- Condition: new
VAICO | V10-7237-1
£ 52,75
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: V10-7237-1
- Vehicle Equipment: for vehicles with headlight levelling (electric)
- Alternatively
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 46,2
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 39,4
- Condition: new
VAICO | V10-7236-1
£ 52,75
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: V10-7550
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Quantity Unit: Piece
- Axle alignment required after fitting
- Condition: new
VAICO | V10-7549
£ 77,30
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Triangular Control Arm (CV)
- Cone Size [mm]: 15
- Supplementary Info: Original VAICO Quality
- paired article number: V10-9797
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 36,1
- Packaging height [cm]: 9,6
- Packaging Depth [cm]: 41,5
- Condition: new
VAICO | V10-9798
£ 39,63
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7236
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Vehicle Equipment: for vehicles with headlight levelling (electric)
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 35
- Packaging height [cm]: 8
- Packaging Depth [cm]: 57
- Condition: new
VAICO | V10-7237
£ 55,97
Condition: new
Top VOLKSWAGEN SANTANA models
